Description

Attention.

Because "ZELLO" has officially changed the control method,

Currently does not support the use of the mouse middle button key control.

Only support vox contro

We send by default: use 6-pin 16-pin conversion board

If you need to use the 6-pin 26-pin conversion board,

please write to us.

“TX: RED” and “RX:B/G” :?? This is LED status indictors.

When R1 controls an external radio, R1 lights up red.

When the external radio receives the signal, R1 blue light or green light.

Switch position-MOTO:

Connect 6-pin to 16-pin converter board, used by Motorola radio stations（16-pin interface）,(Default accessories

Connect 6-pin to 26-pin converter board, used by Motorola radio stations（26-pin interface）,(Optional accessories)

Switch position -Y, K, C:

Direct connection, YAESU、Kenwood、 ICOM ... Radio use （6-pin TNC interface）

Switch position-ASL OFF:

AllStarLink is disabled, the USB sound card chip stops detecting COS / CTCSS and controlling PTT.

Switch position –ASL ON:

AllStarLink is enabled, USB sound card chip detects COS / CTCSS and controls PTT.

Note2: “ASL ON”, Only use AllStarLink to connect with Raspberry Pi. In other states, the switch position must be in ASL OFF !!!

DIN 6 Interface:

???? Use 6-pin Cable.R1 to connect YAESU / Kenwood / ICOM-radio;

Use 6-pin cable and "6-pin-16 pin conversion board". R1 connect Motorola-radio;

Use 6-pin cable and "6-pin-26 pin conversion board". R1 connect MotoTRBO-radio;

USB Audio:

???? USB-Radio Interface, Connect to PC or Raspberry Pi;

USB Detection:

???? USB mouse middle button detection, connect to PC when running ZELLO or YY...;

USB Serial Port:

???? USB serial port, connect to PC when running ECHOLINK / PSK31 / SSTV ...;

Package Accessories list ：

1X R1 controller???????????

2X USB-D Cable????????????????

1X 6 PIN Cable????????????????

1X 6PIN-16PIN conversion board