🔹 Playseat Challenge X LOGITECH G EDITION Full Reinforcement Kit (4 Types)

Product Introduction
We sell the full line of Playseat Challenge and Challenge X Logitech G Edition.

We also offer various pedal mounts and shifter mounts (including handbrake and sequential). Please check my listing page for the full selection.

Customers in Korea trust our products as the most reliable in the market.

The reason will be explained below.

🛠 Features of ChallengeBob’s Reinforcement Kit

• Enhances the vibration feel of the wheel.
• In particular, the body reinforcement kit greatly improves wheel vibration.
• Length adjustment methods and overly complex structures reduce durability and increase fatigue due to extra work before and after gaming.
• We solved this by applying a simple structure with 100% infill, greatly improving durability.
• Designed for quick and easy installation and removal with minimal effort.

🛠 Features of ChallengeBob’s Pedal and Shifter / Handbrake / Sequential Mounts

• Pedal Mount: Securely fixes the pedal without the need for Velcro straps.
• Shifter / Handbrake / Sequential Mounts: Can be mounted on either the left or right side as desired, and remain extremely stable without wobbling after installation.

O. Playseat Challenge X Logitech G Edition Pedal Reinforcement Kit (2EA 1SET)
Some models secure the pedal connection ring (plastic) with rivets instead of bolts. This product is designed for bolt-fixed models. If your unit uses rivets, we must send the rivet version pedal reinforcement kit instead, so please inform us when ordering.

• When using a load cell brake in the Logitech Edition, we confirmed the seat tends to lift up. This kit solves that problem completely.
• With a heavy wheelbase, balance can be lost and the seat may tip forward. This kit eliminates that issue.
• Folding and unfolding becomes much easier than before.
• As shown in the picture, even one side of the mount can hold a heavy Fanatec V3 completely suspended in the air.
• If tightened too much, the pedal will not move; adjust with bolts.
• If rivet type, please check the product image in the link below and install in order.
  Rivet Pedal Reinforcement Kit Link

O. Playseat Challenge X Logitech G Edition Frame Reinforcement Kit
- Improved in December 2024.
- The gap between folding and unfolding the steering wheel is worse than that of the existing Playseat Challenge.
- This eliminates shaking caused by that gap.
- Please see the cross-sectional photo. Infill is 100%.
- We do not recommend repeatedly opening and closing the wheelbase. Repeated operation can cause play due to gaps.

O. Playseat Challenge X Logitech G Edition Wheelbase Reinforcement Kit (2EA 1SET)

• Does not interfere with your legs.
• Removable products, but fixed versions are also available.
• Prevents wheel shake.

Installation
- Determine the location and loosely install the bolts.
- Loosen the bolts on the mount part and move it to the appropriate position.
- Use the mounts marked in red according to the installation position. There are long and short ones.
- When installing on a detachable mount, insert until you hear a click (may be stiff at first). Refer to the picture.

O. Playseat Challenge X Logitech G Edition Body Reinforcement Kit (2EA 1SET)

• Does not interfere with your legs.
• Prevents the entire front of the Playseat from shaking.
• The front body of the Logitech Edition shakes too much and is weaker than the original Challenge. This is why we created the world's first reinforcement kit.
• Can be installed up to 4–6 stages (please request if you need under 3 stages).
• The video test used 1 stick with 15% infill. The sold version includes 2 sticks with 100% infill.

Installation
- Install so that the English engraving faces the user. The engraving is marked on both top and bottom.
- Check the location first, then loosely install bolts.
- Loosen the mount bolts and move to the correct position. (Refer to pictures for positioning.)
- For step 5 use, slightly raise the mount; for step 4 installation, use the long mount provided.
- Mounts are numbered.
- When installing on the bottom removable mount, insert until you hear a click (may be stiff at first, you might need to tap firmly with your hand). Install the other side in the same way.

** In the last photo, you will see an early version of the body reinforcement kit (marked as number 3). It improves wheel vibration but does not prevent front shaking, so it was discontinued.

🛠 Product Durability

• Flimsy mounts and reinforcement kits that crumble like cookies must now be bid farewell.
• The PLA+ 3D printed clamps are designed with both strength and flexibility in mind, providing perfect support for an immersive virtual racing experience.

🌈 Prusa 3D Printing Precision

• Manufactured with the latest genuine Prusa printers.
• Boasting sub-1mm precision, ensuring parts fit the frame perfectly and are securely fixed.

🛠 Lifetime After-Sales Service You Can Trust

• We do not force product repurchase when issues occur.
• Instead, we offer a lifetime after-sales service trusted by Korean customers.
• If parts are damaged or issues arise, please send a picture via eBay message.
• We will promptly send a replacement (buyer covers shipping fee).

Request Replacement Link

🔧 See More Products

Check out Playseat Challenge reinforcement kits, pedal mounts, and other high-quality racing accessories. All are designed to enhance your equipment's performance.

📦 Shipping

• Handling time: 1–2 business days
• Estimated delivery: 12 business days (varies by location)
• Customs duties may apply depending on your country's shipping policies.

↩ Returns

• Returns accepted within 30 days after delivery.
• Buyer pays return shipping unless the item is defective or incorrect.
• Returned items must be in original condition.