|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features:
1、LCD Liquid Crystal Display: Large LCD display, support battery working status display, solar panel working status display, mode control display, load output status and each parameter display, normal and fault status display.
2、7 Operation Modes:Charging mode, light control mode, light control + time delay control mode, general control mode, manual control mode, timing control mode and test mode, the test mode is only for factory test use.
3、4 kinds of voltages automatic identification:It will automatic identify DC12V/24V, DC36V, DC48V by itself.
4、Large-section Wiring Port: use large-section, large-spacing wiring ports, can be installed 16mm wire, the wire spacing of 7mm increases the insulation performance and the reliability of installation, effectively reduces current and voltage drop while reducing losses.
5、Dual USB Charging Ports: The solar charge controller adopts a dual USB charging port design, which can charge two devices at the same time, and supports most of USB port devices, such as mobile phones, tablets, PSP game consoles, etc.
6、Thickened Aluminum Alloy Heat Sink: The MOS tube is used to lock the heat sink design, the heat dissipation is more uniform, and there is no fear of the temperature rise caused by the MOS tube, the powerful heat dissipation capacity can operate normally in the environment of 55 ℃, at the same time, it is equipped with functions to prevent overcharge, overvoltage, DC output low voltage, high voltage protection and reverse polarity protection, etc.
Specification:
Type: Solar Charge Controller
Maximum charging current: 100A 120A 150A
Maximum input voltage of photovoltaic panels: 15V-23V(12V), 30V-45V(24V), 45V-69V(36V), 60V-90V(48V)
Maximum input power of photovoltaic panels: 1000W (12V), 2000W (24V), 3000W (36V), 4000W (48V)
Output voltage: DC12V/24V/36V/48V; DC5V/1.5Ax2USB
Support Battery: Lithium Battery & Lead Acid Battery
Working temperature: -25℃~55℃
Cooling method: heat sink self-cooling
Charging method: Focused MPPT modulation charging
Working mode: seven
Protection function: prevent overcharge, overvoltage/DC output low voltage, high voltage protection, reverse polarity protection, etc.
Product size (L*W*H): 195*183*68mm/7.68*7.20*2.68inch
Package size (L*W*H): 205*205*70mm/8.07*8.07*2.76inch
Note:
1.Please connect the battery to the controller first, and then the photovoltaic panel to ensure that the battery voltage is higher than (12V battery is higher than 10V; 24V battery is higher than 20V; 36V battery is higher than 30V; 48V battery is higher than 40V), otherwise it will cause voltage Identification error.
Package Included:
Solar Charge Controller*1
Manual*1
We want our customers to feel safe knowing they can return their items, no questions asked! If you are not happy with your items for any reason, simply follow these 3 easy steps!
1. Email us to get the return mailing address
2. Write down 'RETURN' clearly on the envelop and return to the address provided.
3. Buyers will be contacted to arrange refund of merchant value once the returned item is received. Please note that postage is NOT refundable.
Returns Restrictions:
1) All returns must be postmarked within 3 days of receipt of your package.
2) If items are damaged, we must be contacted within 24 hours of receipt. We will not accept any items with odors (perfume, smoke, etc.)
3) All original tags must be attached, with no signs of wear.
We are not responsible for any custom duty or import tax.
Average delivery time:
|
Country |
Delivery Time |
|||
|
Working Days |
1-3 |
4-8 |
8-10 |
|
|
Australia |
Rate of item arrived |
40% |
55% |
5% |
Local pick up is not available!!!
If the goods haven't arrived after our average delievery time, please contact us as soon as possible, we can do our best help you.
boomtrade66
Your Best Choice

100 120 150A MPPT Solar Charge Controller DC 12V/24V/36V/48V 4000W PV Regulator
Features: 1、LCD Liquid Crystal Display: Large LCD display, support battery working status display, solar panel working status display, mode control display, load output status and each parameter display, normal and fault status display. 2、7 Operation Modes:Charging mode, light control mode, light control + time delay control mode, general control mode, manual control mode, timing control mode and test mode, the test mode is only for factory test use. 3、4 kinds of voltages automatic identification:It will automatic identify DC12V/24V, DC36V, DC48V by itself. 4、Large-section Wiring Port: use large-section, large-spacing wiring ports, can be installed 16mm wire, the wire spacing of 7mm increases the insulation performance and the reliability of installation, effectively reduces current and voltage drop while reducing losses. 5、Dual USB Charging Ports: The solar charge controller adopts a dual USB charging port design, which can charge two devices at the same time, and supports most of USB port devices, such as mobile phones, tablets, PSP game consoles, etc. 6、Thickened Aluminum Alloy Heat Sink: The MOS tube is used to lock the heat sink design, the heat dissipation is more uniform, and there is no fear of the temperature rise caused by the MOS tube, the powerful heat dissipation capacity can operate normally in the environment of 55 ℃, at the same time, it is equipped with functions to prevent overcharge, overvoltage, DC output low voltage, high voltage protection and reverse polarity protection, etc.
Specification: Type: Solar Charge Controller Maximum charging current: 100A 120A 150A Maximum input voltage of photovoltaic panels: 15V-23V(12V), 30V-45V(24V), 45V-69V(36V), 60V-90V(48V) Maximum input power of photovoltaic panels: 1000W (12V), 2000W (24V), 3000W (36V), 4000W (48V) Output voltage: DC12V/24V/36V/48V; DC5V/1.5Ax2USB Support Battery: Lithium Battery & Lead Acid Battery Working temperature: -25℃~55℃ Cooling method: heat sink self-cooling Charging method: Focused MPPT modulation charging Working mode: seven Protection function: prevent overcharge, overvoltage/DC output low voltage, high voltage protection, reverse polarity protection, etc. Product size (L*W*H): 195*183*68mm/7.68*7.20*2.68inch Package size (L*W*H): 205*205*70mm/8.07*8.07*2.76inch
Note: 1.Please connect the battery to the controller first, and then the photovoltaic panel to ensure that the battery voltage is higher than (12V battery is higher than 10V; 24V battery is higher than 20V; 36V battery is higher than 30V; 48V battery is higher than 40V), otherwise it will cause voltage Identification error.
Package Included: Solar Charge Controller*1 Manual*1
Payment
We accept only PayPal payment.
Please pay the money within 2 days after the auction ended. we will send the shipping address usually be according to your paypal address so please make sure your shipping address is correct. Shipping
All items sold by us are being described to the best of our abilities, as accurate as possible, and with utmost conscientiousness on our part.
However, to avoid any potential oversights, I respectfully request your assistance in helping us to make this a mutually satisfactory transaction by THOROUGHLY reviewing item description and photos, and asking all questions PRIOR TO BIDDING.
**Please Note that size and color representation are subject to manufacturing variance and may not be exact. Also note that monitor settings may vary from computer to computer and may distort actual colors. Please read these terms thoroughly before placing your bid.
Returns
We want our customers to feel safe knowing they can return their items, no questions asked! If you are not happy with your items for any reason, simply follow these 3 easy steps! 1. Email us to get the return mailing address 2. Write down 'RETURN' clearly on the envelop and return to the address provided. 3. Buyers will be contacted to arrange refund of merchant value once the returned item is received. Please note that postage is NOT refundable. Returns Restrictions: 1) All returns must be postmarked within 3 days of receipt of your package. 2) If items are damaged, we must be contacted within 24 hours of receipt. We will not accept any items with odors (perfume, smoke, etc.) 3) All original tags must be attached, with no signs of wear. We are not responsible for any custom duty or import tax. Customer Services
Customer feedback is very important to us.Once your item arrives in satisfactory condition, Please leave positive feedback for us and 5 star DSR score. Our automatic system will do the same for you . Please contact us if you have any question on the items, we will handle these within 1 business day.
Average delivery time:
Local pick up is not available!!! If the goods haven't arrived after our average delievery time, please contact us as soon as possible, we can do our best help you. Copyright of XXXX. All rights reserved. |
New List Item |
||||||||||||||||||||||||||||||||