Red Floor Paint Interior and Exterior Use Hard Wearing and Quick Drying Rustins

PLEASE NOTE: All items will be shipped and delivered by the following services: Evri, DX, DHL and Royal Mail. The service used is dependent on location of delivery, weight of parcel, size of parcel, value of contents and carrier restrictions of transport.

Rustins Quick Dry Floor Paint Red is hard-wearing, and based on a high-quality waterborne acrylic emulsion. It is non-flammable with a low odour that can be used for interior and exterior applications.
  • Versatile Surface Application: Rustins Quick Dry Floor Paint is ideal for a variety of surfaces including concrete, brick, stone, and wood, providing a reliable solution for multiple flooring needs
  • Durable and Long-Lasting: This floor paint is formulated to withstand heavy foot traffic and daily wear and tear, ensuring your floors remain protected and looking good for years to come
  • Fast Drying Formula: Rustins Quick Dry Floor Paint dries quickly, allowing you to complete your painting projects faster and get back to using your space with minimal downtime ADD TO BASKET
  • Easy to Apply: With its smooth consistency, this floor paint can be easily applied using a brush or roller, ensuring an even coat and professional finish on all surfaces
Size: 1 Litre and 100ml Sample*

*the 100ml sample is decanted by us into a 100ml tin. We also provide a photocopy of the usage instructions. This is ideal for touching up a small area or for trying the paint before committing to a larger size.

Usage Instructions:
Preparation: The floor must be clean and free from wax, grease and dust. Any cracks in the garage floor can be repaired with mortar. If applying to interior or exterior concrete ensure the concrete is dry and that there is no dampness rising through the concrete. Rising dampness can cause adhesion failure. Efflorescence and alkaline salts that form under the coating because of dampness can cause adhesion failure. If in doubt carry out a test. Always dilute the first coat by 50% with water to act as a sealer. Two further diluted coats will be required. If applying to a wooden floor, remove all traces of wax polish which may have been applied, with wire wool and white spirit, wiping off the solution with a clean rag. Large holes or cracks can be filled with Rustins Wood filler.
Application: By short bristle brush or roller
Coats: Total of 3 coats. Always dilute the first coat by 50% with water to act as a sealer. Two further undiluted coats will be required

Warning:
Contains 5-CHLORO-2-METHYL-2H-ISOTHIAZOL-3-ONE(55965-84-9). May produce an allergic reaction.
May cause an allergic skin reaction.