Product Description
2024 New Upgrade Ver. of LAUNCH CR529, CRP123X: ABS/SRS Systems Diagnoses (Including Active Test) + 3 Reset Services: Oil/BMS/SAS Reset
What’s the difference between LAUNCH CR629 scan tool and other ABS & SRS diagnostic tools?
They are limited to Read DTCs, Clear DTCs and Live Data functions, while LAUNCH CR629 obd2 scanner supports not only those but also advanced Version Information and Active Tests, to fully check Anti-lock Braking System and Supplemental Restraint System, and 3 reset functions: Oil Reset, SAS Calibration and BMS reset.
- Active Tests (Bidirectional Control): Instead of getting help from someone else or having to run around to the driver’s seat, you can fully understand the nature of the problem by simply commanding your vehicle through LAUNCH CR629. With bidirectional control function for the ABS / SRS systems, this OBD2 scanner can request information or command a specific function from these two systems to pinpoint the system faults, e.g. turn on or off the SRS light to check if the wire or the light is OK.
- Oil Reset, SAS Calibration and BMS reset: Don't go to repair shop or garage! Save your money and time!
* Please note: These Functions do NOT work on all vehicles. It varies by make, model, and year of gasoline or diesel engine vehicle. Please send VIN(17 digits) to us to check compatibility before purchase.
WHY YOU WANT TO BUY LAUNCH CR629 SCAN TOOL FOR YOUR CAR?
LAUNCH CR629, not only an OBD2 SCANNER, but also an ABS SRS BIDIRECTIONAL SCAN TOOL!
ABS/SRS Systems Diagnoses + ACTIVE TEST for ABS/SRS Systems
The functions of ABS/SRS system diagnoses:
- Active Tests: LAUNCH OBD2 scanner CR629 can request information or command a specific function from these two systems to pinpoint the system faults
- Read Version Information: LAUNCH code reader CR629 will tell you the specific information for the tested control unit, including unit type, version numbers, and other specifications. It saves you from confirming information with the manufacturer when replacement work is required.
- Read / Clear DTCs: Read the DTCs to know the cause of the lit MIL and the vehicle faults. Clear the DTCs after repairs to turn the ABS or SRS indicator light off.
- Read Live Data Stream: Retrieve the real-time data stream including coolant temperature, MAP value, mass air flow, ambient temperature, engine rpm, etc. for deep analysis.
ABS & SRS system diagnoses:
Compatible with: ACURA, AUDI, BENZ, BMW, CHRYSLER, CITROEN, DACIA, DAEWOO, FIAT, GM, HOLDEN, HONDA, HYUNDAI, INFINITI, JAGUAR, ISUZU, KIA, LANDROVER, MAZDA, MINI, MITSUBISHI, NISSAN, OPEL, PEUGEOT, PORSCHE, RENAULT, SAAB, SEAT, SKODA, SMART, SPRINTER, SUBARU, SUZUKI, TOYOTA, USAFORD, VOLVO, VW
ACTIVE TEST for ABS & SRS system:
Compatible with: BMW, CHRYSLER, PORSCHE, FIAT, RENAULT, FORD&MAZDA, GM, AUDI, BENZ, CITROEN, PEUGEOT, SMART, VOLVO, VW ,Honda, Toyota, Kia, Nissan, HYUNDAI, Jaguar, Land Rover
*PLEASE NOTE: ABS & SRS system diagnoses and ACTIVE TEST does NOT work on all vehicles. To check compatibility, please send your car's model year and functions you need to launch-aftersales @ outlook.com before purchase.
LAUNCH CR629 Diagnostic Scanner Supports 3 Reset Services: OIL RESET + SAS CALIBRATION + BMS REEST
3 Useful Reset Services to Keep Your Vehicle Healthy
Get in the habit of conducting regular oil change, timely SAS calibration and BMS reset, you can avoid potentially costly breakdowns as well as extend the life of your car.
- OIL RESET: Changing engine oil until the engine’s lubricant looks something like sludgy black molasses will damage the engine and affect vehicle performance. You need not only an oil change operation every 3000 miles but also an oil reset tool - LAUNCH CR629. Our OBD2 scanner can easily reset the oil service mileage after you have changed the oil and oil filter, which allows you to better schedule your next oil change.
Compatible with ACURA, AUDI, BENTLEY, BMW, BORGWARD, BUGATTI, CITROEN, CHRYSLER/DODGE/JEEP, DAEWOO, FERRARI, FIAT, GM, HONDA, HYUNDAI, JAGUAR, KIA, LAMBORGHINI, LANCIA, LANDROVER, MASERATI, MAZDA, MAYBACH, MERCEDES-BENZ, MINI, MITSUBISHI, OPEL, PEUGEOT, PROTON, PORSCHE, RENAULT, ROLLS-ROYCE, ROMEO, SAAB, SEAT, SKODA, SMART, SUBARU, SUZUKI, VAUXHALL, VOLVO, VW, DACIA, FORD, INFINITI, ISUZU, LEXUS, NISSAN, SCION, TOYOTA
- SAS CALIBRATION: Improper SAS may cause sliding and overturning of the vehicle, so it’s essential to calibrate it when you perform airbag deployment, structural repairs, or a wheel alignment. With our OBD2 scan tool CR629, you can rely on the service of SAS reset to zero out the sensor and make sure the steering angle sensor is calibrated to the rest of the sensors that are part of the stability control system.
Compatible with ACURA, AUDI, BMW, CHRYSLER/JEEP/DODGE, CITROEN, DACIA, DAEWOO, DAIHATSU, FERRARI, FIAT, FORD, GM, HONDA, HYUNDAI, INFINITI, JAGUAR, KIA, LANCIA, LANDROVER, LEXUS, MASERATI, MAYBACH, MAZDA, MERCEDES-BENZ, MINI, MITSUBISHI, NISSAN, OPEL, PEUGEOT, PORSCHE, RENAULT, ROMEO, SCION, SEAT, SUZUKI, SKODA, SMART, SUBARU, TOYOTA, VAUXHALL, VOLVO, VW
- BMS RESET: Perform a reset on the vehicle battery for clearing the fault information and re-match the battery.
Compatible with AUDI, BMW, CITROEN, FORD, INFINITI, JAGUAR, LANDROVER, LAMBORGHINI, BENTLEY, BUGATTI, LEXUS, MAZDA, MINI, MITSUBISHI, NISSAN, PORSCHE, PEUGEOT, SEAT, SKODA, TOYOTA, VOLVO, VW
*PLEASE NOTE: 3 Reset Services does NOT work on all vehicles. To check compatibility, please send your car's model year and functions you need to launch-aftersales @ outlook.com before purchase.
You can also check the vehicle compatibility on LAUNCH OFFICIAL WEBSITE qcar.x431.com/qcar/#/pc/index?q=eyJsYW4iOiIxMDAxIn0%3D
LAUNCH CR629 OBD2 Scanner, A Best Investment for DIYers!
No more Vague Check Engine Lights
LAUNCH CR629 car code scanner supports Full OBD2 Functions including Read/Erase Codes, Live Data Stream, Freeze Frame Data, I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Component Test, Vehicle Information Retrieval.
What can these functions do for you?
- Turn the MIL off– After you get the diagnostic trouble codes erased, the check engine light can be off automatically
- Pass the Smog Test – Check your car’s I/M Readiness status before the emission inspection. Take a well-running vehicle to pass the emission inspection successfully
- Locate Emission Problems– Full Obd2 functions are significant for figuring out what the root cause is. The diagnostic information is comprehensive, reliable, accurate, and valuable for reference.
- Reading / Erasing Codes finds out the problem and clear the code.
- Read Freeze Frame allows vehicle to snapshot data once a code is stored.
- Read Live Data Stream offers merges graphs for easy and intuitive diagnosis.
- Vehicle Info reads the vehicle’s VIN, CIN, and CVN to save time.
- O2 Sensor Test troubleshoots O2 sensors to improve fuel efficiency.
- I/M Readiness checks if the car is ready for a smog test to avoid being fined.
- On-Board Monitor Test reads the results of on-board diagnostic monitoring tests.
- EVAP System Test commands the vehicle’s on-board computer to start the leak test.
LAUNCH CR629 OBD2 Scanner, A Best Investment for DIYers!
|
|
|
|---|
EASY TO USE
This diagnostic tool saves you from time-consuming diagnostic processes. 3 hotkeys simplify the operation process. With only one click, you can complete DTC reading, DTC erasing, or I/M readiness. Meanwhile, you’ll get high information readability and legibility. Our OBD2 scanner combines both the visual and audio effects, with 3.5 inches LED color screen and the built-in speaker.
DATA RECORD & REPLAY
With our OBD2 scanner LAUNCH CR629, it’s unnecessary to write down the diagnostic information for future analysis. You get a Data Record and Replay function to record valuable diagnostic trouble codes, data stream, and freeze frame data in this OBD2 scan tool directly. Feel free to replay or delete the recorded information at any time.
MULTI-VEHICLE DIAGNOSIS
One LAUNCH CR629 can be used with multiple vehicles.
Full OBD2 Functions –OBD2/EOBD Protocol Vehicles Available;
ABS/SRS Diagnoses –42 Vehicle Brands Available;
Oil Reset –53 Vehicle Brands Available;
SAS Reset –41 Vehicle Brands Available.
The amount of the available vehicle brands will increase as you update scan tool LAUNCH CR629.
HOW TO UPDATE LAUNCH CR629 SCAN TOOL?
HOW TO UPDATE LAUNCH CR629 SCAN TOOL?
There is no charge except for diagnostic scanner LAUNCH CR629 itself. You get the service of a free lifetime update, which means that you can always update your obd2 scan tool to the up-to-date version free of charge. After connecting it to PC, you also can print the diagnostic information out in case of electronic data loss.
Complete update within 2 minutes:
1. Download and install the update tool on the PC;
2. Connect the scanner with PC;
3. Find Serial NO. & Register Code in the scanner and write them down;
4. Register the scanner on the update tool (only for initial use);
5. Connect the memory card with the PC and copy the update package into it.
6. Reinsert the memory card into the scanner and start update.
*If you want to print the records, just click [Print Manager] to synchronize the records on the PC and print them out via the printer connected to the PC.
LAUNCH CR629 Specifications：
Display: LCD 3.5-Inch, 320*480
Operating Voltage: 9~18V
Storage Temperature: -20℃~70℃（-4℉~158℉）
Working Temperature: -10℃~50℃（14℉~122℉）
Dimension: 215*114.1*34.5 mm（8.46*4.49*1.36 inch）
Length: 1185 mm (46.65 inch)
Net Weight: 535g (18.87oz)
PACKAGE LISTS:
1* CR629 Code Reader
1* Quick Start Guide
1* User Manual
