57-60mm DIY Handheld Skiving Machine Skiver Cutting Splitter Cut Leather Tool



Style: Installed directly use style
Blade width: Approx. 57-60mm/2.24-2.36inch
(Generally no more than 50mm cut leather as well,The best initial leather thickness is not exceeding 6mm)
Machine dimension: Approx. 18.5*8*5.5cm/7.28*3.15*2.17inch
Package size: Approx. 20*11*13cm/7.87*4.33*5.12inch
Weight: About 950g
Applicable scene: Home; Tailor; Factory
Fit leather: Soft leather; Hard leather; High-density Leather
Function: Skiving edge; Skiving Thinner; Segment Skiving; Entire piece Skiving Thinner


Blade Installation:
1. Use a hex wrench to remove the fixing screws of blade clamp.
2. Insert into the blade.
3. Tighten the fixing screws.
4. Viewed from the front,the relative position of the blade and rollers should be parallel.

Skiving Operation:
1. According to the thickness of the skiving,adjustment the screw of the handle.
2. Open the handle,put the leather between the roller and the blade. 
3. The position of the leather should be in the middle of the roller,the tablet can make the leather press against the surface of the roller.
4. The right hand clenched the handle,Pull to the right.