Features:
Higher brightness: 6500K pure white light reflect road paint/signs better to show clearer road situation, 500% brighter than the original car
Super bright LED chip, good light type, 360 degree clear beam no blind zone
Engineering beam pattern design throw light on road evenly at appropriate angle without foggy light
High stability, fan, more stable heat dissipation, suitable for extremely cold areas
Shock resistant: Robust design, unibody construion minimize damage by most rigorous driving condition.
Easy installation: small size, non-polar design

EMC anti-electromagnetic interference

 

Parameter:
Model: 9012/HIR2 LED Headlamps
Voltage: DC9V-30V

Power: 55W/bulb

Lumens: 18000LM/Set
Light source: CSP-3570
Color: 6500K white

Over 50000hrs lifetime
Applicable: led high low beam headlight bulb, not recommended for fog lights

 

Package include:

2* Bulbs

 

Attention:
LED bulb is low power device, the following issues may occur if you want to use LED bulb on some European vehicles: Hyper Flashing, No Flashing, or Error Code. Those are NOT problems of LED bulb and NOT covered by warranty. You may simply add a set of load resistor (NOT included) to avoid those issues.can be solved with a decoder (decoder must be purchased separately)

 

Install Caution:

1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.

2. Put the vehicle into park or make sure it is securely in gear.

3. Make sure to have the ignition turned off and the keys removed.

4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.

5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.

6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.

7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.