Brand New Pair of One-Man Brake Bleeder Screws SAE 5/16-24 x 24mm 

 

2PC Bleeder Set


Popular fitment:

CHEVROLETCORVETTE1970-1982


Note on availability:

We currently have (1) set of these bleeders in stock! Contact me if you need more than listed.


5/16-24 thread size.

They are universal but of course your caliper must have 5/16-24 bleeder port thread size!


We have only had customers of early Corvette models use this bleeder. Do your research. They may fit the front or the rear calipers. Listing is for 2pc bleeder screws. You may need 4pc to do both front and rear.

These are very small bleeders. They are only 1.00 long overall. They may have other uses such as certain hydraulic clutch cylinders and more.


This listing has been created by request of one of our valued customers. More on the way.  This will impose a slight delay before we can ship it out if our on hand quantity is (0). We do get new shipments in weekly. I will update the status as this changes. Contact me prior to your purchase to check, confirm and get an ETA if this is a problem. Thanks for your consideration.

Be aware we get this set with various color thread sealer as the photos show some options but lately, most of the time, they have a red thread sealer applied. Regardless of the thread sealer color, they all do the same thing, seal the threads for you...

 

This part has many fitments + Universal applications that use a 5/16-24 brake bleeder screw! Please make sure this is the size you need prior to your purchase because we can't take them back. No returns on these custom brake bleeders.

 

These bleeders are intended to replace the factory bleeder screw, making available a speed bleeder any time brake bleeding is desired! These will also fit many other applications requiring a 5/16-24 bleeder screw.  Many other sizes are available by request with a small delay. If you know your bleeder size you can contact me to see if there is a Speed Bleeder available for your particular application. Please confirm your fitment before you purchase!

 

LOOK: Take a look at the stock picture.  The finish may vary. They all have a high quality plated finish. Some are a gold tone and some a silver tone. The locking thread compound also can be various colors. They range from red, gray, green and black. We have also seen blue and white! I'm sure there may also be additional colors and tones. If any of this is important just contact me prior to your purchase to check, confirm and get an ETA if there is going to be a slight delay. 

 

A purchase of quantity of (1) will be for a pair of bleeders (2 bleeder screws)

 

 

Description from the manufacturer:

Dimensions: 5/16-24 x 1.0 length 
  • Built in check valve makes it unnecessary to use any special pressure or vacuum equipment, turning the process of bleeding brakes into an easier, single person task. Simply open bleeder, 1/4 - 1/2 turn, pump brakes and close.
  • Affordable alternative to purchasing brake bleeding equipment saving money.
  • Once installed, no equipment to set up or disconnect to the brake system - always there when you need to bleed the brakes. Saves time.
  • Stainless, brass, and zinc coated construction provides superior corrosion resistance depending on the specific application. Contact me to confirm. Most are either a silver or gold tone zinc plated finish. 
  • Thread sealant is already applied - keeps the bleeder in place and prevents corrosion which makes it easier to loosen bleeder in the future. Prevents rounding of Hex head corners.

 

Quick listing of automotive makes that this will fit:

This bleeder screw will interchange with lots of part numbers including the following list: I will update as these details become available.


 

 

The patented bleeder screw with the built-in check valve. It is truly a one person bleeder screw. Makes a very easy job of purging the brake system. When you need to bleed the brakes, just open the speed bleeder screw 1/4- 1/2 turn and pump the brake pedal to perform the bleeder operation.  When the pedal is depressed the pressure generated opens the check valve letting air and brake fluid out of the end of the Speed Bleeder. When you release the pedal and it returns to the up position, the check valve closes and prevents any air from reentering the system through the Speed Bleeder. When bubble free fluid is evident you close the Speed Bleeder. In the closed position it works just like your stock bleeder screw and prevents any brake fluid from leaking out. You can easily repeat this operation at a later date when you need to bleed your brakes again. The patented thread sealing system makes it easy to open the bleeder screw to perform the bleeding operation.

 

Quick listing of automotive makes that this will fit:

This bleeder screw will interchange with lots of part numbers including the following list:

Manufacturer applications include vehicles from:


Please, you must confirm your needed size & fitment prior to your purchase. I will update the list as more details become available.

Basic listing search shows that the 5/16-24 bleeder screw fits many rear drum brake wheel cylinder applications, some brake caliper applications & other various applications. If you are unsure I'm happy to help check and cross reference prior to your purchase. I can't really help if you purchase it and then have a fitment issue!