PowMr Solar Charger Controller MPPT 60A 12V 24V 36V 48V Blacklight LCD Regulator Max PV Input 155VDC Support Lithium batteries
POWMR 60Amps MPPT solar charge controller is based on an advanced maximum power point tracking(MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 98.1%.
Advantages:
- 【60A MPPT charging controller】3-stage battery charging algorithm for a rapid, efficient, safe charging(Bulk Charge, Boost Charge, Float Charge, and Equalization), 60amp Rate Charging current.
【Controller wide range solar voltage/power support】Controller supports High PV Input Power/voltage. The controller can accept Solar voltage up to 190V. When battery is 12V system: Suggest Solar power 720W, suggest range:DC20V~DC80V；1440W 37V~105V when 24V; 2100W 50V~155V when 36V; 2800W 72V~155V when 48V.
【12V/24V/36V/48V battery support】Negative grounding design controller safer, controller Compatible with a variety of batteries(lead-acid and lithium, User customize); Sealed, Gel, Flooded and LI (LFP) battery charging parameter pre-set, other battery can be customize charging parameter according to your need.
【0 layer MPPT charge controller】Easy to know the Charging process in one glance.
【Full charging pro tections】Short Circuit/Overcurrent/Reverse Polarity, etc. protections; a Very detailed LCD screen and 4 buttons make this solar controller very simple to use. And detailed troubleshooting list, Fast service support, and Simple and detailed wiring instruction are available. - 【Supports up to 12 Units in Parallel 】The parallel operation function allows for easy expansion of the solar panel configuration and energy storage capacity limits, thus increasing the scale of energy storage. For detailed parallel operation guidelines, refer to Section 7
- 【Lithium battery activation
】 Compatible with lithium batteries. When the battery type parameter is set to lithium batteries, the
charging cycle will be adjusted to accommodate the needs of lithium battery charging. Additionally,
when connected lithium batteries are in a protected state, the controller will activate the lithium
batteries with the energy from the solar panels, with current not exceeding the lithium battery
protection voltage and current range.
Warning: Do not charge lithium batteries when the temperature is below 0°C.
Feature:
- M6-PRO Support One-Click Factory Reset
- Lithium Battery Activation
- Supports parallel connection of 12 units.
- MPPT 30A/40A/50A/60A solar charge controller
- 99.99% MPPT technology
- 0 Layer, easy installation, easy setup
- Built-in DSP controller with high performance
- Automatic switch for 12V/24V/36V/48V battery bank
- 3-stage charging optimizes battery performance
- Overcharge protection, Input PV polarity reverse protection, Output limited current protection,
- Over-temperature protection
- Troubleshooting promotion function.
- Suitable for battery types such as sealed lead acid, vented gel, and lithium battery, etc
- Easy to be mounted
Specification:
| Models | POW-M60-ULTRA |
| Charging mode | MPPT Maximum power point tracking automatically |
| Charging | 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge |
| System type | DC12V/24V/36V/48V Recognition automatically |
| Solar Input Parameters | |
| Maximum Input Power: | |
| For 12V System | 720W |
| For 24V System | 1440W |
| For 24V System | 2100W |
| For 24V System | 2800W |
| Input Voltage Range: | |
| For 12V System | 20V~80V |
| For 24V System | 37V~105V |
| For 24V System | 50V~155V |
| For 24V System | 72V~155V |
| Battery Charging Parameters | |
| Battery Voltage Range | 9~60V |
| Rated Charging Current | 60A |
| Maximum Efficiency | ≥98. 1% |
| Solar Utilization Rate | ≥99% |
| Self-consumption | 0.7W-1.2W |
| Load Terminal Output | |
| Rated Output Current | 25A |
| Max. Capacitive Load Capacity | 10000µF |
| Environmental Parameters | |
| Operating Temperature Range | -35℃~+45℃ |
| Humidity Range | ≤95%, non-condensing |
| Altitude | <3000m |
| General Specification | |
| Protection Level | IP32 |
| Dimensions | 221x163x77mm /8.7x6.42x3.03in |
| Net Weight | 1442g / 3.18lb |
Package Includes
1 x 60A MPPT Solar Charge Controller
1 x English User Manual
1 x Installation Guide card
1 x Installation screws
1 x Parallel Communication Cable
1 x Parallel Communication Terminal
1 x External temperature sensor
Mounting information
- Battery must be connected first. NEVER connect the solar panel array to the controller without a battery.
- Ensure input voltage does not exceed 190 VDC to prevent permanent damage.
- Do NOT let the positive (+) and negative (-) terminals of the battery touch each other.
- Do NOT connect any inverters or battery charger into the load terminal of the charge controller.
- Place the controller on a vertical surface protected from direct sunlight, high temperatures, and water. Make sure there is good ventilation.
- Please check for Clearance, verify that there is sufficient room to run wires, as well as clearance above and below the controller for ventilation. The clearance should be at least 3 inches (75mm).
• PowMr offers a variety of shipping methods such as USPS, UPS, FEDEX. Any items that qualify for free shipping will be identified on the product listing page.
• Your order will be sent out WITHIN THE HANDLING TIME. HANDLING TIME are based on 3 business days (Monday to Friday) excluding Holidays and weekends . Delivery times may vary, especially during peak periods.
• The order of multi items may be sent via MULTI PACKAGES. If your order is including MULTI ITEMS, we may send the item to you via MULTI PACKAGES. If something is missing in the first package you received, please don't open a case or return, please contact us first, we will check if your order is sent via multi packages.
• All items will be shipped to the address on Ebay order. Buyers have full responsibility to provide us with the correct delivery address on the checkout page before payment is made.
• Re-delivery fee may be charged to buyers for items that are undelivered or returned to us due to incorrect delivery address or unsuccessful deliveries.
• For purchases made directly from our online store, if for any reason you are not fully satisfied with your purchase, you may return your products with original package within 30 days as long as they are new, undamaged, and unmodified. We can not guarantee that your item will be accepted for a refund or exchange if it does not meet these requirements.
• PowMr will pay the shipping costs of the returned item(s) for the following reasons: carrier damage, defective product, product inconsistent with advertisements, incorrect product received. For all other reasons, customers are responsible for the return shipping fees.
• If damage results due to improper handling during the setup or installation, whether done professionally or by the customer, then the product is no longer eligible for replacement or refund.
• Please note: We will not accept returns with product modifications as it voids our warranty policy. Any modified products received will be returned to you at your expense.
Please be prepared with your invoice or the following information：
1. Order number
2. Proof of purchase
3. Video or photo of the faulty product (if applicable)
4. Mailing address
PowMr is an energetic and technologically innovative company, dedicated to researching, manufacturing and marketing solar related products. We provide products including Solar Controllers, Micro Grid Tie Inverters, Solar Lamps, MC4 Connectors and other Solar Related Products. The company presses the ISO9000 quality management system control product quantity strictly, the export production all passes the relevant national company check (CE), get high evaluation of the customer. Since 2009, our service has been expanded to all over world. Our products are widely used in Spain, United Kingdom, France, India, Italy, Australia and many other countries and regions , and have been extensively applied and highly appraised in a number of major projects.
- Fast Delivery
- Free Shipping
- 24 months warranty
一Avg. response time 1 Hrs(WorkingDay)
- PowMr Everywhere
1. “Highly Quality first, customer orientation”is our purpose.
2. PowMr will be committed to provide the best service to you!
- Please contact us via eBay massage if you have any questions. We will reply you within 24 hours (Monday to Friday) excluding Holidays and weekends .
- If the device has any problem, before you open the return/case, feel freely to contact us please. We have the professional engineer team and afte-sale, we will try our best to help you out.
- Feedback is important to us, we will leave positive to our customers. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute.
- We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.
