Please note that it is normal for the product cannot be retracted after pulling it apart.

Make sure you pull it apart when you are ready to install it,

DO NOT pull it apart while checking the item.

Please make sure you don't mind before purchasing.

OEM Part Number:

54102757016
 

54102755848

Compatible with:

For Mini Cooper R55 R56 R60 2006-2016

Feature:

Car Sunshade Protector: Protect your car interior from sun glare and heat.

Vehicle specific product. Please spread the shade cover after installation.

Enhances Privacy: It will protect you from direct damage from the sun effectively.

Designed by rolling feature and easy to install.

Specification:

Condition: Brand New

Material: Cloth + Plastic

Placement on Vehicle: Sunroof, Front

Color: Black

Installation Steps:
 

1. Move the plastic on the track to a similar position. (Tools can be used to manually move the plastic to this point ).
 

2. Install the roller shade assembly of the Compatible with Mini Cooper with the holes aligned.
 

3. After installation, with a tool manually move the fastener of the Compatible with Mini Cooper forward a little, so as to observe

whether the spring enters the track. (It is recommended to use a small tool to push the spring down when the spring is moving forward, so as to facilitate the spring to enter the track)

4. After the spring enters the track and fix the plastic, then start testing with machine (Note: Halfway through the operation, put your hands below both sides of the roller shade and then gently push upward to judge whether the spring has accurately entered the track. If it does not enter, the spring will come out. ).
 

5. During the test, if the spring does not enter the track, the roller shade can be closed for reinstallation. 

*Installation Instruction:

Please do not open the roller shutter before installing the assembly.

Before assembly and installation, carefully check whether the track is deformed, and then clean the track Grooves on both sides of the track.Keep it clean and dry.

Before assembly debugging, first check whether the roller shutter is installed in place and whether the mesh is held by one end of the track.

In the assembly debugging stage, first manually open and close.

Attach the built in installation tool on the sunroof.

Please fixed the sunroof shade cover on the car.

After the debugging is normal, the motor can be used to open and close.

Spread the shade cover, and it can work.
 

Note:

Please allow 1 -3cm error due to manual measurement.

Please make sure your car model and OE number before purchasing.
 

Package Included:

1 x Front Sunroof Roller Blind