This item includes:

3 PC Nema 42 stepper motor with 23N.M=3265oz-in for Single shaft, 110BYGH150-001

3PC Stepper Motor Driver DQ2722MA


 



1, Stepper Motor

Technical Specifications

Part No.:                          110BYGH150-001 Single shaft 

Frame Size:                     NEMA42

Step Angle:                     1.8 degree

Voltage:                           5.44VDC

Current:                           6.8 A/phase

Resistance:                     0.8Ohm/phase

Inductance:                     15mH/phase

Holding torque:               23N.M     3256oz-in

Rotor inertia:                   1090 g-cm2  

Number of Wire Leads:   4

Weight:                            8.4kg

Length:                            150mm

RED              A+

GREEN         A-

YELLOW      B+

BLUE            B-

2. stepper motor driver:DQ2722MA

Introduction

           The DQ2722MA is full digital 2 phase stepper driver based on DSP control. The drive voltage of which is from 110V to 220VAC. It is designed for use with the 2 phase hybrid stepper motor of all kinds with 86mm to 130mm outside diameter, regulated phase current1.0A to 9.8A. The circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly without noise and vibration. The highest micro step is 60000ppr. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, computer embroider machine, packing machine and etc.



Feature

  •   High performance, low price
  •   16 channels constant angle, constant torque micro steps, highest micro step: 60000ppr
  •   Highest response frequency: 200Kpps
  •   Current of winding will be reduced by approximately 50% when no step pulse command is received for 0.1 second
  •   Opto-isolated signal I/O
  •   Drive current is adjustable in 16 channels from 1.0A/phase to 9.8A/phase
  •   Single power supply from 110V to 220VAC
  •   Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 5s and it is recovered when stepper driver power on or signal MF changes from low level to high level)