✅Designed For Plug & Play: 1:1 design As long as the model is correct Only 10 Minutes Installation,saving your time and no need to go to the auto store, no installation cost and no close contact with the crowd.
Important Notice:
Our LED replaces halogen bulbs only. It does not replace HID or LED from factory.
Information:
a)Compatible List can not show up all Car model. Please check the Correct item size of your vechicle. it will work and fit.Thank you!
b)If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
For example:
For 2004 Ford F150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F150 ,XL Crew Cab Pickup 4-Door 2.7L
b)If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
For example:
For 2004 Ford F150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F150 ,XL Crew Cab Pickup 4-Door 2.7L
M5 Series Features:
✅Ultra-Quiet + Long Lifespan: Equipped with a fan, it can work for a long time, 3570 LED bulbs allowing you to comfortably enjoy the driving with noiseless over 60,000 hours.
✅High-end Customized CSP Chip: Equipped with customized 3570 lamp beads, each pair of 3570 LED headlight bulbs can be up to 5000lm, 300% brighter than original Halogen Lamp, high brightness and far light distance will help you see wider and farther and drive saferly.
✅Safe Beam Pattern: CHUSYYRAY 3570 Series LED bulbs adopt the same halogen filament position design. Perfectly match the halogens’ beam pattern with a clear cutoff point. And the light is focused down the road so does not blind or glare oncoming traffic and Road eligible.
✅High Quality and Standard: IP67 water resistant and designed for use in heavy rains, rainproof housing, can work even in extreme situations.
Product Specs:
Bulb Size:9003/H4/HB2 + H11/H8
Light Mode: High Low Dual Beam + Fog Light
Package includes: 4pcs Bulbs
Interior/ External Driver: Interior
Voltage: DC 9-16V
Light Power: 70W/set (35W/bulb)
Luminous Flux: 4,000LM/set (2,000LM/bulb)
Color Temperature: Bright White 6,000K
Certification: IP67 Water and Dust Seal, CE, RoHS
Light Mode: High Low Dual Beam + Fog Light
Package includes: 4pcs Bulbs
Interior/ External Driver: Interior
Voltage: DC 9-16V
Light Power: 70W/set (35W/bulb)
Luminous Flux: 4,000LM/set (2,000LM/bulb)
Color Temperature: Bright White 6,000K
Certification: IP67 Water and Dust Seal, CE, RoHS
Package Includes:
1x Pair 9003 H4 High Low Beam
1x Pair H11 H8 H16 Fog Light
Randomly send new and old packaging boxes
Need Canbus decoder/ resistor?
The M5 series LED bulbs can work well on most vehicles. But when it's changed to LEDs to cause the flickering or error code on your vehicle, you will need one pair of the decoder to cancel the error.
Install Caution:
1.As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2.Put the vehicle into park or make sure it is securely in gear.
3.Be sure to turn off the ignition and remove the key.
4.Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5.Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6.Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7.Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1.As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2.Put the vehicle into park or make sure it is securely in gear.
3.Be sure to turn off the ignition and remove the key.
4.Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5.Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6.Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7.Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
➤Please Note:
Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us in time, before opening return or case.
➤After service Notification:
It is impossible for any product to be 100% suitable for all types of vehicles, and our products can be suitable for 99% of all types of vehicles.If you are satisfied with our product and service please leave us a positive feedback,if there is any problem when you received the package,please feel free to contact us,we will be definitely give you a satisfying solution,when you choose the return reason .please choose the reason"i don't like it".by this option we will accept your return immediately and provide return label for full refund.the others reason to return will take both of us many troubles to handle.