Product Description
Print mark contrast sensor, 9.5 mm detection range, RGB light, light/dark on, external Teach-in, push-pull output, M12 plug

General specifications
Sensor range		9.5 mm ± 3 mm
Light source		LED
Light type		Visible green/red/blue, modulated light
Light spot representation		1 mm x 4 mm
Angle deviation		max. ± 3°
Ambient light limit
	Continuous light	7000 Lux
Teach-In		static Teach-In

Functional safety related parameters
MTTFd		650 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %

ndicators/operating means
Function indicator		LED yellow; switching operation: lights up if print mark is detected Teach-In operation: flashing slowly alarm display: flashing quickly, if no safe operation is possible
Control elements		Teach-In key
Electrical specifications
Operating voltage		10 ... 30 V DC
Ripple		10 %
No-load supply current		≤ 70 mA
Input
Function input		Teach-In input
Output
Switching type		light/dark on switchable, results from the order of the Teach-In
Signal output		Push-pull output, short-circuit protected, reverse polarity protected
Switching voltage		PNP: ≥ (+UB -2.5 V) , NPN: ≤ 1.5 V
Switching current		max. 200 mA
Switching frequency		16.5 kHz
Response time		30 µs
Conformity
Product standard		EN 60947-5-2
Compliance with standards and directives
Standard conformity
	Shock and impact resistance	IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
	Vibration resistance	IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions