I. Basic Parameters

Model: ERIKC 23670-0E010 (Original Factory 23670-0E010)

OE Equivalent Number: 295700-0550, 23670-0E020

Type: High-Pressure Common Rail Piezoelectric Electronic Injector (G4 Series)

Working Pressure: Maximum 2000 bar

Drive Voltage: 12V, piezoelectric ceramic drive, faster response

Injector Model: G4S009 (6-hole precision injector)

Valve Assembly: G4 Control Valve Plate

Material: High-strength alloy bearing steel + high-temperature resistant fluororubber seals

Dimensions/Weight: Overall length approx. 178mm, net weight approx. 780g

Warranty: 12 months (ERIKC brand new quality guarantee)

II. Compatible Engines and Vehicle Models (2015–2025)

Toyota Hilux Revo 2.8L 1GD-FTV Diesel Engine (China V Emission Standard) 2015–2025

Fortuner 2.8L 1GD-FTV 2015–2025

Land Cruiser Prado 2.8L 1GD-FTV 2015–2025

III. Core Features

6-hole G4S009 Injector, Ultra-fine Atomization: 6 holes × 0.15mm precision aperture, oil droplet size ≤12μm, atomization uniformity improved by 20%, power increased by 12%+, fuel consumption reduced by 6–10%, lower emissions, compliant with China V emission standards.

Piezoelectric Ceramic Drive, Ultra-fast Response: Compared to solenoid valves, piezoelectric response time ≤0.1ms, supports 5-stage injection (pre-injection + main injection + post-injection), more stable idling, less vibration, instant cold start, strong low-speed torque, and no acceleration lag.

ERIKC precision manufacturing, durable and robust: The valve body is made of high-carbon chromium bearing steel with a hardness of HRC 62–64, offering wear resistance and impact resistance; the seals are temperature resistant from -40℃ to 400℃, resistant to diesel corrosion and high-pressure carbon buildup.

The needle valve assembly features nano-level ultra-precision grinding and vacuum heat treatment, ensuring strong sealing, no jamming, stable performance for 200,000 kilometers, and durability comparable to the original equipment manufacturer (OEM).

Fully compatible with OEM, 1:1 direct installation: No modification or re-matching required; directly replaces the OEM; after installation, rail pressure is stable, injection accuracy and return volume are consistent with the OEM, and ECU calibration is not affected.

IV. Common Faults and Replacement Recommendations

Typical Fault Symptoms:

Engine vibration, unstable idling, weak acceleration, black smoke, limited power

Difficulty starting in cold weather, high fuel consumption, excessive fuel return, sluggish acceleration

Fault Codes: P0201–P0204, P0263, P1201, P1604

Replacement Tips: For single-unit faults, it is recommended to replace the entire assembly individually. For piezoelectric structures, it is not recommended to disassemble and repair internal components separately.

During replacement, the cylinder head seat holes and oil passages must be cleaned thoroughly to prevent impurities from entering and causing jamming.

After installation, use a common rail tester to check the injection pressure and fuel return volume to ensure they are within the standard range.

V. Installation and Precautions

Installation Torque: Injector retaining nut 28±3 Nm (Do not overtighten to prevent valve body deformation)

Installation Points:

Clean the cylinder head mounting surface to remove carbon deposits and impurities.

Check the injector for damage, gaskets for breakage, and nozzles for wear.

During installation, gently press the gasket vertically into place to avoid misalignment, which could lead to poor sealing.

The copper sealing gasket must be replaced to prevent air and oil leaks.

VI. Interchangeable and Replacement Models

23670-0E010: Original part number, main model

295700-0550: After-sales part number, fully interchangeable

23670-0E020: Upgraded model in the same series, functionally compatible

G4S009: Compatible nozzle model, can be replaced separately

Welcome to ERlKC Diesel injector Parts Store!
Manager：Funda

There are many auto parts in our shop.If you can't find the accessories you needyou can contact me.Thank you!
Condition:

100% NEW , high quality, easy to install

Please make sure the interchange partnumber matches the part you are replacing
Please check our photos and make sure thepart shown looks identical to your stock one.

【VEHICEL APPLICATION】: Most Car
【MATERIAL】We only use the highest grade materials,built to Strict Quality Control Standards, Meets the OEM standards.Every product must take inspected and tested multiple times before the shipment.
【NOTICE】: Please use the year/make/model drop down bar confirm the compatibility before purchasing. And make sure our part number is the same with your existing one before purchase!
【WARRANTY】: Order from ERIKC, Please recognize our brand name: ERIKC , We can't guarantee the quality of other sellers provided can be same as ours.And if our products bring your any trouble,please contact us,We will help you solve out immediately.
100% Brand New , High Quality .

Shipping:

•   We Ship to Worldwide,
•   Items will be shipped within 3 business day on payment received.
•   Shipment is directly from Hongkong Post via regular airmail. it usually takes 10-15 business days shipping to USA ,
• and shipping to other place will take about 25-35 days. Due to variation of postal service in different areas, some areas may take a little longer.

Payment:

•   We accept PayPal only.
•   All major credit cards are accepted through secure payment processor PayPal.
•   Payment must be received within 7 business days of auction closing.
•   We ship to your eBay address. Please make sure your eBay address is correct before you pay.

Warranty and Guarantee:

•    12 months Warranty. Buy with confidence!
•   During the warranty period, we can exchange new one or refund.

Other Policies:

•    We are not responsible for any custom duty or import tax.
•    Serious Buyer Only! Please place bid only if you agree with all the terms.