1.Avoid chemical solvents, strong acids and alkali entering the machine
2.Shower waste can be disposed without a cutter
3.When installing the device, placing a check valve is necessary
4.Make sure that waste water flowing from equipment automatically enters the pump
5.Maintenance should only be performed by qualified professionals
6.Disable electrical power and remove the plug from the socket before performing repairs on the device
7.Install a leakage protector socket & earthing conductor
| Power | 300W |
| Horizontal Discharge | 70M |
| Max Temperature | 90C |
| Max Flow Rate | 100L/Min |
| Voltage | 220 - 240V / 50Hz |
| Vertical Discharge | 7M |
| Noise Level | 45 dBA |
| IP Rate | IPX4 |
Some small items may pass through the pump. But larger items unfortunately can block the pump. This is the main cause of breakdown record by our customer support department.