Add-On Electric Brake Kit – 7,000 lb Axle – 12" × 2" Self-Adjusting – 8 on 6.5" – 9/16" Studs
Complete add-on brake kit for replacing both left and right electric brakes and hub/drum assemblies on one 7,000 lb trailer axle. This kit includes self-adjusting 12" × 2" electric brake backing plates and complete 8-lug hub and drum assemblies with bearings, grease seals, and dust caps. Components arrive assembled and ready for installation.
Features
- Complete replacement for both sides of one 7K axle
- Self-adjusting 12" × 2" electric brake assemblies
- 8-lug hub and drum assemblies (8 on 6.5")
- 9/16" wheel studs
- Bearings, seals, and dust caps included
Specifications
| Part Number | 92865-B-FSA-IMP |
| Axle Rating | Typically used on 7,000 lb axles |
| Brake Size | 12" × 2" Electric, Self-Adjusting |
| Brake Flange | 5-Bolt Mounting Pattern |
| Wheel Bolt Pattern | 8 on 6.5" |
| Wheel Stud Size | 9/16" |
| Outer Bearing | 14125A |
| Inner Bearing | 25580 |
| Grease Seal | 10-36 (2.25" ID) |
| Dust Cap | 2.71" OD, rubber plug style |
What’s Included
- (2) 8-lug hub and drum assemblies
- (1) Left-hand self-adjusting electric brake assembly
- (1) Right-hand self-adjusting electric brake assembly
- (2) Bearing kits with bearings, seals, and dust caps
Fitment Notes
Commonly used on 7,000 lb trailer axles with 12" × 2" electric brakes and a 5-bolt brake mounting flange. Verify bearing numbers, seal diameter, and brake flange compatibility before installation. Some applications may require a 2.125" grease seal.
Fitment Advisory: Designed for axles using a standard 12" × 2" electric brake setup with an 8-lug (8 on 6.5") hub pattern and 9/16" studs.
Always verify spindle dimensions, bearing sizes, and brake flange pattern prior to ordering.