Description

Envirotile Synthetic Slate Tiles

(Choice of tile size and colour)

Use the most secure tile from just 12 per square metre!

Lightweight and virtually unbreakable recycled roof tile with natural slate finish. Features a unique watertight 8Fix system that fits quickly and securely, whilst outperforming all other synthetic tiles in severe weather conditions.

Envirotile tiles interlock with adjacent and under tiles to form a more secure integrated roof covering, and uses a reduced lap that can require just 12 tiles per square metre; so reduces weight, material cost and work. Reduced weight means cheaper transportation, reduced CO? transport emissions and less structural roof requirement. Being easy to work with and approximately 50% the weight of other synthetic tiles, makes Envirotile the perfect choice for creating an authentic looking conservatory roof conversion.

Features & Benefits

Interlocking fixing - installs quickly and stops uplift
Lightweight roofing - 80% lighter than a concrete tile
Low-pitch solution - pitched from 12.5? to vertical
Virtually unbreakable - easy to transport and fit
Smaller lap - lower cost per metre and less work
Reduces build costs - easy to handle and quick to fit
Improved surface - easy grip and anti-fungal
Fully recyclable - made from recycled plastics
25 Year guarantee - long service and peace of mind

Did you know? The Envirotile is also available as a Half Tile and Double Tile. Half Tiles can be used to initiate a weatherproof broken bond, finishing the verge, and for detailing around abutments or flashings. Double Tile can be used as a discreet filler tile for long sections, and are recommended on the ends of each course; this is especially important on hipped faces to ensure that first and last tiles have adequate fixing points.

Envirotile is weather tested to 147mph winds and fully guaranteed to perform under sever wind load throughout the UK, and is part of a complete suite, which includes membrane and tape, ridge and hip solution, eaves and ventilation.

In this listing you can buy...

Single Tile

Lightweight and virtually unbreakable recycled roof tile with natural slate finish. Features a unique watertight 8Fix system that fits quickly and securely.

Double Tile

Double tiles ensure adequate fixing points at the end of each course, and are especially useful on hipped roofs. Lightweight and virtually unbreakable.

Half Tile

Half tile with natural slate finish, for initiating a weatherproof broken bond, finishing the verge, and for detailing around abutments or flashings.

We also sell...

Ridge & Hip Caps

Underlay Ridge & Evaes

Envirotile Fixings

Envirotile Dry Verge

Technical Information

Single Tile

Measurement	Value
Size (l x w x t)	365mm x 325mm x 11mm (full and double tile available)
Coverage (per m2)	280mm Gauge (22.5° - 90°) = 11.9 single tiles 265mm Gauge (22.5° - 90°) = 12.6 single tiles 250mm Gauge (12.5? - 22.5°) = 13.4 single tiles
Weight	379g per half tile (full tiles are 649g, approx. 8Kg/m2)
Material	Recycled polymer. Injection moulded using 100% of UK reliably sourced reprocessed Polypropylene.
Batten Recommendations	Battens should be 38mm x 25mm for 450mm rafter centres, and 50mm x 25mm for 600mm rafter centres.
Bond	Requires a 5mm gap between tiles for expansion, and a single or half bond can be used without need for additional fixings.
Guarantee	25 years against material product defects or failure to perform under normal use
Credentials	EN15601 ? 5 times better performance than conventional tiles/slates with standard fixings BBA Certified ? conforms to BS 5534:2014 BS15087:2005 BS476-3 ? EXT.S.AA - External Fire Exposure Roof Test DD CEN/TS 1187 test 4 ? B Roof t4 - External Fire Exposure Roof Test ISO 9001 Certified PASS Greenspec endorsed
Fixing	30mmx 3.35mm stainless steel annular ring shank (>= 25° Pitch) 30mm x 4mm countersunk stainless steel screw (< 25° Pitch)
Cutting	Cuts easily with a medium toothed hand saw or powered saw, and emits no dust pollution during cutting
Storage	Envirotile should be stored on a dry flat area. Cover with tarpaulin if subject to sub-zero temperatures, and allow 24-48 hours before roof installation.

Double Tile

Measurement	Value
Size (l x w x t)	365mm x 630mm x 11mm (half and full tile available)
Coverage (per m2)	280mm Gauge (22.5° - 90°) = 6 double tiles 265mm Gauge (22.5° - 90°) = 7 double tiles 250mm Gauge (12.5? - 22.5°) = 7 double tiles
Weight	1.342Kg per double tile (full tiles are 649g, approx. 8Kg/m2)
Material	Recycled polymer. Injection moulded using 100% of UK reliably sourced reprocessed Polypropylene.
Batten Recommendations	Battens should be 38mm x 25mm for 450mm rafter centres, and 50mm x 25mm for 600mm rafter centres.
Bond	Requires a 5mm gap between tiles for expansion, and a single or half bond can be used without need for additional fixings.
Guarantee	25 years against material product defects or failure to perform under normal use
Credentials	EN15601 ? 5 times better performance than conventional tiles/slates with standard fixings BBA Certified ? conforms to BS 5534:2014 BS15087:2005 BS476-3 - EXT.S.AA - External Fire Exposure Roof Test DD CEN/TS 1187 test 4 - B Roof t4 - External Fire Exposure Roof Test ISO 9001 Certified PASS Greenspec endorsed
Fixing	30mmx 3.35mm stainless steel annular ring shank (>= 25° Pitch) 30mm x 4mm countersunk stainless steel screw (< 25° Pitch)
Cutting	Cuts easily with a medium toothed hand saw or powered saw, and emits no dust pollution during cutting
Storage	Envirotile should be stored on a dry flat area. Cover with tarpaulin if subject to sub-zero temperatures, and allow 24-48 hours before roof installation.

Half Tile

Measurement	Value
Size (l x w x t)	365mm x 175mm x 11mm (full and double tile available)
Weight	379g per half tile (full tiles are 649g, approx. 8Kg/m2)
Material	Recycled polymer. Injection moulded using 100% of UK reliably sourced reprocessed Polypropylene.
Batten Recommendations	Battens should be 38mm x 25mm for 450mm rafter centres, and 50mm x 25mm for 600mm rafter centres.
Bond	Requires a 5mm gap between tiles for expansion, and a single or half bond can be used without need for additional fixings.
Guarantee	25 years against material product defects or failure to perform under normal use
Credentials	EN15601 ? 5 times better performance than conventional tiles/slates with standard fixings BBA Certified ? conforms to BS 5534:2014 BS15087:2005 BS476-3 ? EXT.S.AA - External Fire Exposure Roof Test DD CEN/TS 1187 test 4 - B Roof t4 - External Fire Exposure Roof Test ISO 9001 Certified PASS Greenspec endorsed
Fixing	30mmx 3.35mm stainless steel annular ring shank (>= 25° Pitch) 30mm x 4mm countersunk stainless steel screw (< 25° Pitch)
Cutting	Cuts easily with a medium toothed hand saw or powered saw, and emits no dust pollution during cutting
Storage	Envirotile should be stored on a dry flat area. Cover with tarpaulin if subject to sub-zero temperatures, and allow 24-48 hours before roof installation.

Ridge Cap

Measurement	Value
Size (l x w x t)	425mm x 245mm x 105mm
Weight	549g
Material	Recycled polymer. Injection moulded using 100% of UK reliably sourced reprocessed Polypropylene.
Tile Batten Recommendations	Battens should be 38mm x 25mm for 450mm rafter centres, and 50mm x 25mm for 600mm rafter centres.
Tile Bond	Requires a 5mm gap between tiles for expansion, and a single or half bond can be used without need for additional fixings.
Guarantee	25 years against material product defects or failure to perform under normal use
Credentials	EN15601 ? 5 times better performance than conventional tiles/slates with standard fixings BBA Certified ? conforms to BS 5534:2014 BS15087:2005 BS476-3 ? EXT.S.AA - External Fire Exposure Roof Test DD CEN/TS 1187 test 4 ? B Roof t4 - External Fire Exposure Roof Test ISO 9001 Certified PASS Greenspec endorsed
Tile Fixing	30mmx 3.35mm stainless steel annular ring shank (>= 25° Pitch) 30mm x 4mm countersunk stainless steel screw (< 25° Pitch)
Tile Cutting	Cuts easily with a medium toothed hand saw or powered saw, and emits no dust pollution during cutting
Storage	Envirotile should be stored on a dry flat area. Cover with tarpaulin if subject to sub-zero temperatures, and allow 24-48 hours before roof installation.

Gable End Cap

Measurement	Value
Size (l x w x t)	28mm x 325mm x 175mm
Weight	175g
Material	Recycled polymer. Injection moulded using 100% of UK reliably sourced reprocessed Polypropylene.
Tile Batten Recommendations	Battens should be 38mm x 25mm for 450mm rafter centres, and 50mm x 25mm for 600mm rafter centres.
Tile Bond	Requires a 5mm gap between tiles for expansion, and a single or half bond can be used without need for additional fixings.
Guarantee	25 years against material product defects or failure to perform under normal use
Credentials	EN15601 ? 5 times better performance than conventional tiles/slates with standard fixings BBA Certified ? conforms to BS 5534:2014 BS15087:2005 BS476-3 ? EXT.S.AA - External Fire Exposure Roof Test DD CEN/TS 1187 test 4 ? B Roof t4 - External Fire Exposure Roof Test ISO 9001 Certified PASS Greenspec endorsed
Tile Fixing	30mmx 3.35mm stainless steel annular ring shank (>= 25° Pitch) 30mm x 4mm countersunk stainless steel screw (< 25° Pitch)
Tile Cutting	Cuts easily with a medium toothed hand saw or powered saw, and emits no dust pollution during cutting
Storage	Envirotile should be stored on a dry flat area. Cover with tarpaulin if subject to sub-zero temperatures, and allow 24-48 hours before roof installation.

Ridge-to-Apex

Measurement	Value
Size (l x w x t)	280mm x 300mm x 170mm
Weight	464g
Material	Recycled polymer. Injection moulded using 100% of UK reliably sourced reprocessed Polypropylene.
Tile Batten Recommendations	Battens should be 38mm x 25mm for 450mm rafter centres, and 50mm x 25mm for 600mm rafter centres.
Tile Bond	Requires a 5mm gap between tiles for expansion, and a single or half bond can be used without need for additional fixings.
Guarantee	25 years against material product defects or failure to perform under normal use
Credentials	EN15601 ? 5 times better performance than conventional tiles/slates with standard fixings BBA Certified ? conforms to BS 5534:2014 BS15087:2005 BS476-3 ? EXT.S.AA - External Fire Exposure Roof Test DD CEN/TS 1187 test 4 ? B Roof t4 - External Fire Exposure Roof Test ISO 9001 Certified PASS Greenspec endorsed
Tile Fixing	30mmx 3.35mm stainless steel annular ring shank (>= 25° Pitch) 30mm x 4mm countersunk stainless steel screw (< 25° Pitch)
Tile Cutting	Cuts easily with a medium toothed hand saw or powered saw, and emits no dust pollution during cutting
Storage	Envirotile should be stored on a dry flat area. Cover with tarpaulin if subject to sub-zero temperatures, and allow 24-48 hours before roof installation.

Hip Cap

Measurement	Value
Size (l x w x t)	425mm x 165mm x 70mm
Weight	295g
Material	Recycled polymer. Injection moulded using 100% of UK reliably sourced reprocessed Polypropylene.
Tile Batten Recommendations	Battens should be 38mm x 25mm for 450mm rafter centres, and 50mm x 25mm for 600mm rafter centres.
Tile Bond	Requires a 5mm gap between tiles for expansion, and a single or half bond can be used without need for additional fixings.
Guarantee	25 years against material product defects or failure to perform under normal use
Credentials	EN15601 ? 5 times better performance than conventional tiles/slates with standard fixings BBA Certified ? conforms to BS 5534:2014 BS15087:2005 BS476-3 ? EXT.S.AA - External Fire Exposure Roof Test DD CEN/TS 1187 test 4 ? B Roof t4 - External Fire Exposure Roof Test ISO 9001 Certified PASS Greenspec endorsed
Tile Fixing	30mmx 3.35mm stainless steel annular ring shank (>= 25° Pitch) 30mm x 4mm countersunk stainless steel screw (< 25° Pitch)
Tile Cutting	Cuts easily with a medium toothed hand saw or powered saw, and emits no dust pollution during cutting
Storage	Envirotile should be stored on a dry flat area. Cover with tarpaulin if subject to sub-zero temperatures, and allow 24-48 hours before roof installation.

Hip End Cap

Measurement	Value
Size (l x w x t)	180mm x 165mm x 90mm
Weight	295g
Material	Recycled polymer. Injection moulded using 100% of UK reliably sourced reprocessed Polypropylene.
Tile Batten Recommendations	Battens should be 38mm x 25mm for 450mm rafter centres, and 50mm x 25mm for 600mm rafter centres.
Tile Bond	Requires a 5mm gap between tiles for expansion, and a single or half bond can be used without need for additional fixings.
Guarantee	25 years against material product defects or failure to perform under normal use
Credentials	EN15601 ? 5 times better performance than conventional tiles/slates with standard fixings BBA Certified - conforms to BS 5534:2014 BS15087:2005 BS476-3 - EXT.S.AA - External Fire Exposure Roof Test DD CEN/TS 1187 test 4 ? B Roof t4 - External Fire Exposure Roof Test ISO 9001 Certified PASS Greenspec endorsed
Tile Fixing	30mmx 3.35mm stainless steel annular ring shank (>= 25° Pitch) 30mm x 4mm countersunk stainless steel screw (< 25° Pitch)
Tile Cutting	Cuts easily with a medium toothed hand saw or powered saw, and emits no dust pollution during cutting
Storage	Envirotile should be stored on a dry flat area. Cover with tarpaulin if subject to sub-zero temperatures, and allow 24-48 hours before roof installation.

Fitting and Usage

Fitting Envirotile Roof System

Lay using the 3-step layout procedure. Extremely simple to fix, with slide locks for quick alignment and security. Can be cut equally well with hand saw or power saw, without releasing harmful dust during cutting. Half tiles, double tiles and unique eaves bar reduces material cost and work, with no need for an eaves course. The manufacturer has produced a detailed fitting guide to cover residential and commercial property, and we will be creating a dedicated Conservatory Roof Conversion Tiling Guide to support it.