■Trip meter A, B 0-9999.9km
(Display unit: 0.1km, returns to 0 when the range is exceeded)
Switch the display to trip meter B by operating an external switch.
■Oil change time warning
The entered mileage will automatically decrease as you drive.
Maintenance distance (notification mode)
(Setting range: 500-16000km Setting unit: 100km)
■Gear position
(Display contents: All gears (up to 9) displayed, all gears hidden)
Gear number registration function using learning mode
■ Clock, voltmeter, thermometer, fuel gauge
■Clock/Day of the week
(Setting range: 12 hours or 24 hours)
The day of the week will be automatically entered when you set the Western calendar and month/day.
■Voltmeter
(Display range: 8~18V)
Voltage warning light (setting range 8~18V setting unit: 0.1V)
■Thermometer (display range:32°F to 482°F)
By purchasing the SP Takegawa drain bolt separately, it is possible to measure the temperature at the drain bolt.
Temperature warning light (setting range: 140°F~482°F)
Maximum temperature record (setting range: 32°F~482°F)
■Fuel gauge (display range: 6 levels)
Fuel sensor resistance value preset
100Ω 250Ω 270Ω 390Ω 510Ω 1200Ω
User resistance value setting Resistance value range: 0 to 1500Ω
fuel warning light
■ Air-fuel ratio meter, power test function, indicator lamp, external switch
■Air-fuel ratio meter (display range: 12.1 to 17.5)
A separate SP Takegawa O2 sensor and O2 sensor boss are required.
How to install the O2 sensor boss: It is necessary to drill a hole in the exhaust pipe and fix the O2 sensor boss by welding.
The temperature meter and air-fuel ratio meter cannot be displayed at the same time.
The function display can be switched depending on the sensor installed.
■Power test function
Target Speed Record
Target distance record (Target Distance)
Top Speed Record
Each record is displayed as a record. The highest record is displayed at the top, and No. 2 and below are displayed in the order of measurement. Records can be reset.
For target speed/distance settings, set the specified values in the function settings.
■Indicator lamp
Warning lights, turn lights, high beam lights
Neutral light/engine warning light
Oil check lamp/ABS lamp
■External switch
For all meter operations and function settings, use the external switch included with the meter.
■Backlight
Day/Night mode LCD screen AUTO switching function
Brightness adjustment function
Lighting color switching function
Lighting color: white, red, orange, green, blue, yellow
In Day mode, only the needle-type tachometer scale can be changed.
Night mode allows you to change the needle-type tachometer scale and the gradation part of the main LCD
■ Notes
It cannot be installed at the same time as H.I.D. or other manufacturers' LED headlights or fog lights.
Some ballasts/inverters (voltage converters) emit high voltage noise that adversely affects digital circuits, causing product failure or malfunction.
Regarding setting the gear position: To set the gear position, both the speed signal and engine rotation signal must be input to the Super Multi TFT meter.
Therefore, it is necessary to perform automatic reading work by “actual driving”. Do not set the gear position in urban areas, as there are many traffic lights and traffic, which can be dangerous.
When driving, please choose a road with good visibility, check the surrounding road conditions, and proceed with caution.
The gear position display is switched based on speed and rotational speed. When stopped, the display will not change even if you operate the gear change.