3D Printer LCD Screen Protector Replacement Kit

Premium protection for your 3D printer's LCD matrix. This universal kit is specifically designed for 7-inch screens (approx. 153x78mm).

COMPATIBLE MODELS:

• ✅ ELEGOO: Mars 4 Ultra
• ✅ ELEGOO: Mars 5 Ultra
• ✅ ELEGOO: Mars 4 (9K)
• ✅ ANYCUBIC: Photon Mono 4 Ultra 10K
• ✅ UNIVERSAL: Any 7" Resin LCD Screen (Exact size: 153x78mm)

PACKAGE INCLUDES (Full Set):

• 1x Screen Protector Film: High-transparency PET with double-sided protective layers.
• 1x Dust-Absorber Sticker: For removing fine particles before installation.
• 1x Cleaning Wipe Set: Professional Wet (Alcohol) & Dry wipes included.
• 4x Blackout Shading Tape Strips: For securing edges and preventing resin leaks.

Installation Instructions:

1. Remove the old or damaged protective film from the printer screen.
2. Clean the screen: First use the wet (alcohol) wipe, then the dry wipe (cleaning kit included). It is crucial to prevent dust, dirt, or oily fingerprints from getting on the screen.
3. Final cleaning: If necessary, use the adhesive side of the dust-absorber sticker to remove any remaining particles.
4. Verify Size: Check if the protective film matches your screen size. If needed, trim the film to size using the colored grid lines on the protective layer as a guide.
5. Apply Layer #1: Peel off the protective layer with colored lines (Label #1) from one side and carefully apply the film to the screen, aligning it with one of the sides.
6. Remove Bubbles: Smooth the film over the entire screen surface, pushing out air bubbles. You can use a non-sharp plastic spatula or a plastic card.
7. Finish Film Application: Remove the protective layer from the remaining side of the film (Label #2).
8. Seal the Edges: Apply the included **shading tape** along all four edges of the screen with a slight overlap onto the protective film to create a resin-proof seal.

🔍 FIND OTHER SIZES IN OUR SHOP:

Click on the size to open the listing:

• 🔹 5.5" Kit — Anycubic Photon (Early version) — View Listing
• 🔹 5.96" Kit — Creality Halot-One, Prusa SL1S — View Listing
• 🔹 6.08" Kit — Mars 2 Pro, Anycubic Mono, Halot R6 — View Listing
• 🔹 6.23" Kit — Anycubic Photon Mono 4K — View Listing
• 🔹 6.6" Kit — Anycubic Mono 2, Mars 3 Pro/Ultra — View Listing
• 🔹 7.0" Kit — Mars 5 Ultra, Mars 4 Ultra, Mono 4 Ultra — View Listing
• 🔹 7.1" Kit — Phrozen Sonic Mini 8K S — View Listing
• 🔹 7.6" Kit — Anycubic Photon M3 — View Listing
• 🔹 7.9" Kit — Creality Halot One Plus — View Listing
• 🔹 8.9" Kit — Elegoo Saturn, Mono X, Qidi i-Box — View Listing
• 🔹 9.1" Kit — Anycubic Mono X2, 6Ks, Mars 4 Max — View Listing
• 🔹 9.25" Kit — Mono X 6K, M3 Plus, Foto 9.25 — View Listing
• 🔹 10" Kit — Saturn 2/3/4 Ultra, Mono M5s, GKTwo — View Listing
• 🔹 10.3" Kit — Mono M7 Pro, Halot Mage S, GKTwo — View Listing
• 🔹 13" Kit — Anycubic Photon M3 Max, M7 Max — View Listing
• 🔹 15" Kit — Phrozen Sonic Mega 8K, Rex 8K — View Listing

---

Search keywords:
Elegoo Mars 4 Ultra screen protector, Mars 5 Ultra LCD film, Anycubic Photon Mono 4 Ultra protection, 7 inch 3D printer screen guard, 153x78mm LCD protector, resin leak protection kit, LCD gasket tape, screen protector with wipes, 3D printing maintenance.