100% brand new and durable
V4 3-AXIS Gyro for Drift car and Touring Drift F1
1.Working voltage: 5V-8.4V
2.Consumption current: 6V 20mA≤
3.Support input signal: PWM(50-333Hz)/FUTABA S.BUS/SANWA SSR/SANWA SHR
4.Output servo signal: 1520uS(333Hz)/760uS(FUTABA SR)/SANWA SSR
Control system: PID control system
5.End Point Adjustment Function:EPA
6.Control Signal:SBUS/PWM
7.Receiver type:No restriction
Working voltage: 5~ 8.4V
Consumption current: 6V 20mA≤
Working temperature: -10 ℃ + 50
Support input signal: PWM(50-333Hz)/FUTABA S.BUS/SANWA SSR/SANWA SHR
Output servo signal: 1520uS(333Hz)/760uS(FUTABA SR)/SANWA SSR
Control system: PID control system
End Point Adjustment Function:EPA
Control Signal:SBUS/PWM
Receiver type:No restriction
Dimension: 25*26*10mm
Weight: 12g
Instruction of Function Switch
1.EPA(Travel Setting)
Press the "SW" switch to power on,yellow LED blinks slowly.Entering to the servo travel setting,rotate the remote control steering wheel to make servo stop at the desired position(turn left/turn right).Short press"SW" switch,yellow LED blinks 2 times quickly,red LED becomes solid,and green LED blinks slowly,it means current travel has been saved.Then rotate the remote control steering wheel to make the servo stop at the other desired position,short press the switch ,yellow LED blinks 2 times quickly,and then the yellow LED turns on,it means current travel has been saved as well.2 seconds later,the gyro will automatically enter into initialization mode,once completed,gyro is ready for use.
2.Reset(Travel Restore Default Setting)
Press the "SW" switch to power on and enter into the travel setting mode.After pressing and holding the switch for 3 seconds,the yellow LED starts to blinks alternately.Restore to default after 2 seconds. Then it will enter into initialization mode,once initialization is completed,the gyro is ready for use.
3.Gain signal input or potentiometer adjustment is determined when the power is turned on. If loss of signal happened during using,the last signal is retained.
4.Suitable for most of remote control systems,while plug in the gain wwire,it can adjust the sensitivity by transmitter;while do not plug in the gain wire,the gyro's potentiometer can be used for gain adjustment.
5.Suitable for FUTABE S.BUS & SANWA SSR
6.Adjust the gain via gain channel of transmitter(default for S.BUS input),the range if from -100%~0~+100%.
7.While do not plug in the gain wire,the gyro's potentiometer can be used for gain adjustment,range from 0~100%.
8.After powering on,press the SW for a while,LED2 flash(next to the SW),then short press the SW,and choose the direction of the X/Y/Z axis.
1. We accept Payoneer ONLY,Item will be ship to the Ebay shipping address if no special notes from buyer.
if no payment arrive in 7 days after item ended.
2.If you can't checkout immediately after auction close, please wait for a few minutes and retry.
1.Worldwide shipping. (Except some countries and APO/FPO)
2.Orders processed timely after the payment verification.
3.We only ship to confirmed order addresses. Your order address must match your Shipping address.
4.Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
5.If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon
1.100% Real Picture.We take the pictures of the products by ourselves for showing you the original products. These are only for your reference because there may be a little difference between the pictures and the real item.
2.12 months Manufacturer`s limited Warranty for defective items. Defective items must be reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. We do not repair or replace items with an expired.
1.You have 30 days to return it from the date it was received. If this item is in your possession more than 30 days, it is considered used and we will not issue you a refund or replacement. There are no exceptions! Shipping cost is buyer .
2.All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and your po#.
3.We will refund your full winning bid amount , upon receipt of the item in its original condition and packaging with all components and accessories included.After both buyer and seller cancel the transaction from EBAY. Or, you may choose to have a replacement.
4.We will bear all the shipping cost if the product(s) is (are) not as advertised.
1.Buyer's early confirmation will be highly appreciated after receiving the items.
2.Since your feedback is very important to our business's development. If you are satisfied with our product and service, we sincerely invite you to leave positive feedback for us.
3.Please contact us before leaving any negative or neutral feedback. We will work with you to solve any problems.