Oil Catch Can Kit Reservoir Polished Tank + Breather Filter Universal Aluminum S
Features:
[Universal]It can be applied to most cars, making sure there's enough room for Installation.
[Size] Hose length: 1m,hose ID:3/8",hose OD:2/3".The thread of the inlet and outlet is M16*1.5.Capacity:300ML.
[Breather Filter] You can install the oil catch can with Breather Filter for pre-PCV cars as a vent system or without breather filter in line between PVC hoses as a seal can, all for your option.
[Note] When the temperature outside reaches the freezing point or below, the crank vent system will generate a much greater amount of moisture which can present a risk of freezing. 
[Warranty] We provide this product 3-month warranty. Any problem you might have, please feel free to contact us via message.
 
 
 
Specifications:
Color: Silver
Thread Size: M16*1.5
Material:Light-Weight Aluminum  
6mm 8mm 10mm Adapters
Updated NBR fuel line(Length:1M)
 
 

Functions:
Collect steam from the crankcase, reduce the amount of steam entering the intake branch. Reduce carbon deposition.
The baffle could cool hot oil vapor and turn into liquid, catch the oil and vapor. Can better protect the engine.
The catch can will keep out the dirt and oil get inside your engine from your intake system.
The catch can kit can keep the engine clean, increase horsepower and extend engine life.

 

Installation：
1. Remove the car hood.
2. Take the tube away and set it aside.
3. Wrap non-slip tape around the threaded part of the screw.
4. Place the screw on the oil collecting tank.
5. Use your own nuts and bolts to secure the bracket to the device.
6. Remove the screw from here, and then place the oil collecting groove in the same screw position.
7. Take a new hose and cut it to the length you think is suitable.
8. Clamp the clamps on both ends of the pipe and hose.

 
 
Package included:
1 x Oil Catch Can with Baffled
1 x Filter
1 x NBR Fuel Line
2 x Bolts
2 x 6mm Fittings (Outer Diameter)
2 x 8mm Fittings (Outer Diameter)
2 x 10mm Fittings (Outer Diameter)
2 x Clamps
1 x Bracket
 
 
 
Pls Note:
(1)It would be highly appreciated if you might contact us first once you have any problems concerning the items. And you can expect all the issues would be resolved ASAP!
(2) Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item
 
1.Payment must be received within 7 days after winning the item，UPI (Unpaid Item Case) will be filed automatically if buyers fail to make the payment in 7 days after item ends.
 
2.If you have difficulty paying for the item, please email us to cancel the order
1.Items will be sent out in 48 hours on payment received from Monday to Friday. Orders during weekends and holidays will be posted in the following working day. 
 
2.Please make sure your shipping address and the order information is correct before placing an order. We will not be responsible for item loss due to wrong or unknown address.
 
3.Items wont be shipped to Puerto Rico(Please check your address before placing an order!
 
4.Items would be shipped within 24 hours with cleared payment(Exclude Weekend and Holidays)
1.We accept 30 days return/refund guarantee
 
2.If the item you received is faulty, damaged or incorrect, or any further problems, you can return it for replacement or refund, please contact our customer service on eBay within 30 days from item received.

3.For damaged items on arrival, please contact us immediately, sending us an email with a photo is preferred. We will offer solutions to such cases. Full refund or replacement will be guaranteed.

Welcome to SPEEDY AUTOPARTS USA Processing Plant!

we have been providing the quality products in automotive parts & accessories for years.

Being a professional e-Bayer that provides you guys the greater shopping experience is our mission.

1.Please contact us first if you have any questions such as product damaged, item not arrived, wrong item sent and item does not work. All those issues would be solved immediately with your satisfactory!
 
2. Please contact us first before you left us a negative/neutral feedback and we are pleased to solve the problems you met.
 
3.Please feel free to contact us if you have any problems and we would always be here for your need .
Performance PartYes
OE/OEM Part NumberUniversal Oil Catch Can
Interchange Part NumberSAU-34
Manufacturer Part NumberSAU-34
Universal FitmentYes
BrandSPEEDY
Manufacturer Warranty3 Months
MaterialsT-6061 Aluminum
Inlet / Outlet DiameterAccepts 3/8" or 9/16" ID Hoses
Placement on VehicleFront, Left, Right,Rear
Surface FinishAnodized