Description: PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. TPS, TP4 Pilot Pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy- Flush-head for sheet thickness of .040” and greater. Satisfies a wide range of positioning, pivot, and alignment applications. Chamfered end makes mating hole location easy. Type TPS recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less. Type TP4 recommended for use in stainless steel sheets HRB (Rockwell “B” Scale) 92 or less and HB (Hardness Brinell) 195 or less.
Quantity: 250
Condition: New

Details

SPECIFICATION
Manufacturer Penn Engineering
Manufacturer's Part Number TPS-6mm-12
Description TPS-6MM-12 Unthreaded Pin, Flush Head
Product Type TPS
Thread Size Unthreaded
Length 12 mm
Material Specification 300 Series Stainless Steel
Finish Specification Passivated and/or tested per ASTM A380
Sheet Thickness 1 mm
For Use In Sheet Hardness HRB 70/HB 125 or Less
Fastener Material 300 Series Stainless Steel
D 4.24 mm ± 0.15
H 8.13 mm ±0.40
P 6.00 mm ±0.05
S 2.29 mm Max.
Hole Size in Sheet 6.5 mm + 0.08
Min. Dist. Hole C/L to Edge 7.9 mm