| Description: | PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.FH (flush-head) studs are available in aluminum, steel, or stainless steel. They are also available unthreaded on special order.Flush-head in designated minimum sheet thickness or greater.Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 80 or less and HB (Hardness Brinell) 150 or less.Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 70 or less and HB (Hardness Brinell) 125 or less.Type FHA is recommended for use in aluminum sheets HRB (Rockwell “B” scale) 50 or less and HB (Hardness Brinell) 82 or less. |
|---|---|
| Animation: | View Animation on vimeo |
| Quantity: | 50 |
| Condition: | New |
Details
SPECIFICATION
Manufacturer
Penn Engineering
Manufacturer's Part Number
FHS-632-20
Description
FHS-632-20 Flush-Head Threaded Stud
Product Type
FHS
Thread Size
#6-32
Length
1.25 in
Material Specification
300 Series Stainless Steel
Finish Specification
Passivated and/or tested per ASTM A380
Sheet Thickness
0.040 in
For Use In Sheet Hardness
HRB 70 / HB 125 or Less
Thread Specification
External, ANSI B1.1, 2A
Fastener Material
300 Series Stainless Steel
Material Code
S
H
0.206 in ±0.015
S
0.09 in Max.
Hole Size in Sheet
0.137 in + .003 - .000
Min. Dist. Hole C/L to Edge
0.25 in
| SPECIFICATION | |
|---|---|
| Manufacturer | Penn Engineering |
| Manufacturer's Part Number | FHS-632-20 |
| Description | FHS-632-20 Flush-Head Threaded Stud |
| Product Type | FHS |
| Thread Size | #6-32 |
| Length | 1.25 in |
| Material Specification | 300 Series Stainless Steel |
| Finish Specification | Passivated and/or tested per ASTM A380 |
| Sheet Thickness | 0.040 in |
| For Use In Sheet Hardness | HRB 70 / HB 125 or Less |
| Thread Specification | External, ANSI B1.1, 2A |
| Fastener Material | 300 Series Stainless Steel |
| Material Code | S |
| H | 0.206 in ±0.015 |
| S | 0.09 in Max. |
| Hole Size in Sheet | 0.137 in + .003 - .000 |
| Min. Dist. Hole C/L to Edge | 0.25 in |
