Description
ADSP-21489 DSP Frequency Divider Board 4 IN 8 OUT ES9028 High-Voltage Board AC80V-250V for ADI SHARC
High-Voltage Version:
* DAC = ES9028Q2M + OPA1612
* ADC = PCM4202 + NJM2068
* ADC/DAC/DAC/ can be replaced with either AES input or output
* Support 4-channel analog input and 8-channel digital output or 4-channel digital input and 8-channel analog output
* Also support 2-channel digital input and 2-channel analog input
* Power: AC80V-250V high-voltage
Description:
This series uses latest fourth-generation processor ADSP21489 for ADI SHARC, with built-in routing/gain/delay/compression/limiter/mute/equalization/high-low-pass filter/all-pass filter and phase and other conventional audio algorithms. Add the following functions, and each function can be turned off or turned on independently.
A. 96KHz/192KH sampling rate switching, combined with functions and sound quality, bringing more scene applications.
B. The dynamic equalizer is automatically optimized for the sound of a large signal or a small signal.
C. FIR filter can perfectly correct the phase distortion caused by system parameter adjustment.
D. The delay supports up to 1200ms per channel. With the fine adjustment of the sound field or phase, the precision is optimized to 0.01ms. The minimum high pass can be set to 10Hz.
E. 4-channel inputs and 8-channel outputs, fully routed, can be set to a variety of operating modes.
F. Color LCD display, real-time dynamic level display, Chinese and English interface optional.
G. One-key mute and overall master volume control.
H. Equipped with Wifi/RS485 central control and drive-free USB control interface, which can be adjusted through the control software on the PC side.
I. Add an I2S slave mode interface, support ASRC; support our USB interface card SA9227, with sample rate 32K-384K/bit width 16/24/32Bit. Support both recording and playing.
J. The default configuration: DAC ES9028Q2M with 5pcs OPA1612 op amp for TI. Very low noise density (1.1nV/√Hz) and ultra-low distortion of 0.000015% are achieved at 1kHz, and the output coupling capacitors are dedicated to audio electrolysis for SAMYOUNG.
Package Included:
* 1 x Set of DSP Frequency Divider
High-Voltage Version:
* DAC = ES9028Q2M + OPA1612
* ADC = PCM4202 + NJM2068
* ADC/DAC/DAC/ can be replaced with either AES input or output
* Support 4-channel analog input and 8-channel digital output or 4-channel digital input and 8-channel analog output
* Also support 2-channel digital input and 2-channel analog input
* Power: AC80V-250V high-voltage
Description:
This series uses latest fourth-generation processor ADSP21489 for ADI SHARC, with built-in routing/gain/delay/compression/limiter/mute/equalization/high-low-pass filter/all-pass filter and phase and other conventional audio algorithms. Add the following functions, and each function can be turned off or turned on independently.
A. 96KHz/192KH sampling rate switching, combined with functions and sound quality, bringing more scene applications.
B. The dynamic equalizer is automatically optimized for the sound of a large signal or a small signal.
C. FIR filter can perfectly correct the phase distortion caused by system parameter adjustment.
D. The delay supports up to 1200ms per channel. With the fine adjustment of the sound field or phase, the precision is optimized to 0.01ms. The minimum high pass can be set to 10Hz.
E. 4-channel inputs and 8-channel outputs, fully routed, can be set to a variety of operating modes.
F. Color LCD display, real-time dynamic level display, Chinese and English interface optional.
G. One-key mute and overall master volume control.
H. Equipped with Wifi/RS485 central control and drive-free USB control interface, which can be adjusted through the control software on the PC side.
I. Add an I2S slave mode interface, support ASRC; support our USB interface card SA9227, with sample rate 32K-384K/bit width 16/24/32Bit. Support both recording and playing.
J. The default configuration: DAC ES9028Q2M with 5pcs OPA1612 op amp for TI. Very low noise density (1.1nV/√Hz) and ultra-low distortion of 0.000015% are achieved at 1kHz, and the output coupling capacitors are dedicated to audio electrolysis for SAMYOUNG.
Package Included:
* 1 x Set of DSP Frequency Divider
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Nov 11, 2023 at 02:28:39 PST, seller added the following information:
