✅ Application
The 58117 M-7 Heater Assembly is specifically designed to fit most fits for BalboaVS, EL, TS, GS, and BP Series control systems. It is also compatible with series M7. It can replace a wide range of part numbers including 52756, 55624, 55625, 55689, 55813, 56487, 58000, 58002, 58010, and more.
✅ Replacement Option
The heater assembly can also replace the following part numbers: 58104, 58120, 55033-01, 58106, 58117, 55033-02, 58056, 58109, 55035-01, 55035, 58064, C2400-0807-TPS, 58120, 58148, 26-0540-5S-KS, 58032, 58281, 58114, 55033, 55625, G7410, 53408.
✅ High-Quality Material
The heater is made of 316 stainless steel, which provides high corrosion resistance and durability, ensuring long-term use without rusting or damage.
✅ Reliable Performance and Problem Solving
Say goodbye to circuit breaker tripping caused by corroded heating elements. Replace your old or broken heater with the 58117 M-7 Heater Assembly to ensure reliable performance and efficient heating for your hot tub or spa.
✅ Product Dimension
Manifold Length: 15", Manifold Diameter: 2", Kilowatt Rating: 4.0KW / 1.0KW, Voltage Rating: 240V / 120V
✅ Designed for Hot Tubs and Spas
The 58117 M-7 Heater Assembly is designed as a replacement heater for hot tubs and spas, equipped with its own sensor and installed in the front for easy maintenance by users.
✅ 100% Satisfaction Guarantee
If you're not 100% satisfied with this tool set, simply return it for a full refund in 60 days. Premium Support & 12-Month Warranty.
This heater can also replace the following heater part numbers:
52756,55624,55625,55689,55813,56487,58000,58002,58010,
58016,58032,58083,58086,58089,58091,58103,58104,58105,58117,
58121,58123,58130,58148,58209,55464,55473,103017,106957,58064,
26-0807-5S-K, 26-0807-7S-K,26-807-5S-KS, 48-SP40-SB,48-SP55-FB,740-0617,
740-0655,9711-207, C2400-0807,C2400-0807-TPS,C2550-0807,C2550-0807-TPS,
X300713,X300930, X300935,X300943,X333131,X801761
Installation Notes
Step 1: Disconnect the power supply of the equipment.
Use an open end wrench to slowly crack the heater split nuts until the water in the pipe flows out
Step 2: Locate the 2 sensors holder on the circuit board.
Remove the 2 heater sensors by depressing the clip and gently pulling on the wire to remove each sensor cable
Step 3: Use a 3/8” wrench to remove the 2 nuts holding the heater in place
Step 4: Use a 3/8” wrench to remove the nuts on the copper straps.
Then lift the copper straps
Step 5: Use an open end wrench to loosen the heater split nuts and remove the old heater assembly and gaskets
Step 6: Replace the new gaskets and install the new heater assembly, tighten the split nuts with an open end wrench.
Step 7: Screw on the 2 nuts that holding the heater, insert the 2 heater sensors into the sensor bracket on the circuit board, make sure the copper strip is connected to the heater and tighten the nuts.
Step 8: Put the cover on and screw on the 2 screws on the top of the enclosure.
Turn on the water valve and pump, restore the power of the equipment, and test
Package Includes:
1pcs 58117 M-7 Heater Assembly
Payment
Payment methods accepted: Payoneer. Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.
Delivery details
1.Orders will be ship out within 1-2 business days after payment has cleared.
2.Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours.
3.All vimin_store items are shipped from the United States and the package will be free of charge for Express Shipping via USPS, UPS. Absolutely Fast and Safe!
Terms of sales
1. If you're not 100% satisfied with our item, simply return it for a full refund. We support 12 months’ Warranty.
2. Leave a message note in returned box quoting your item(s) ID and buyer ID.
3. All returned products must be in their original condition and package. Unfortunately, if products have been assembled or modified, we cannot take them as returns.
4. It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.
5. Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return.
Contact us
Any question, please let me know. We try our best to reply to your emails as soon as possible.
Please allow 24 hours for us to response. your understanding and patience is much appreciated!
1. Please contact us before leaving Negative feedback or open any disputes on eBay if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues.
2. If possible,could you please leave us a positive feedback and 5 star DSR when you receive the item in satisfactory condition. Your kind support will be highly appreciated by us and keep us moving forward.
3.Please note that our product is an aftermarket product (non-OEM). The parts we offer in this listing are an O.E. alternative; they are not produced by O.E. Manufacturers. All names, numbers, symbols and descriptions are used for reference purposes only. If you mind, please do not place an order.
