Step 1. Clean Nails then trim nail surface as normal manicure process.

Step 2. Apply a thin coat of foundation (base coat) from the cuticle to the free edge (Remember to seal the edge of the nail). Cure the nails under the LED lamp for 10 seconds or a UV light for 2 minutes.

Step 3. Apply one thin layer of color gel as base color, cured by lamp 2mins, apply one more color layer (same color) and cured 2mins again. (Remember to seal the edge of the nail). Cure the nails under the LED lamp for 30 seconds or a UV light for 2 minutes.

Step 4. Apply Nail Foil Transfer Gel and cure it under UV/LED lamp.

Step 5. Remove the foil and the foil pattern should be stay on your nails.

Step 6. Apply Top Coat, cure it under UV/ LED lamp.

1. Soak off the nails into acrylic remover for about 5 minutes, 2. Rip down the whole piece of nail enamel gently on each nail.  

1) Prevent touching by children.

2) Keep away from sunshine and heat.
3) Keep tight after use.
4) Follow directions for use.
4) Discontinue use if sensitization occurs.
5) It is normal phenomenon if the gel goes thicker in the case of temperature reduction.