Three-stage switching mode for rpm and torque.
Strengthened gears and body have increased strength by 20% compared to conventional models.
USB type C connector is adopted to prevent confusion when charging.
The connector is equipped with a hole for attaching a drop prevention cord to prevent accidents caused by falling.
For electronic terminal block work, distribution board terminal work, tightening light screws and long screws, etc.
No-load speed (min[[-1 power]]): 280, 340, 400
Maximum tightening torque (N-m): 1.2, 1.6, 2.0
Handle diameter (mm): 45
Overall length (mm): 147
Applicable bits: 6.35mm (side to side)
Charging port: USB Type-C
Charging time: Approx. 60 min.
Charging time: approx. 60 min.
Body: PA6GF15+elastomer, Bit: Special alloy steel (accessory)
Bit [[+]]2x100mm 1 piece, Charging cable 1 piece (Attention)
Condition: New