Thermopanel Wetroom Shower Trays are split in half for easier transport and movability. There are some instances where getting our shower trays through challenging hallways or tight spaces becomes a problem, and this is where our new split trays come in. Being split down the middle allows you to get these trays into the required location with ease. Please ensure the middle of the tray is sealed when installing.
These lightweight shower trays are ideal if you're looking to create a stylish yet effective wetroom. The Thermopanel shower tray allows you to create a waterproof wet room or walk-in shower without having to use the traditional acrylic tray.
The Shower Trays contain the following items:
- Shower Tray of Choice
- Gradient Fall to Drain
- Easy & Quick to Install
- Lightweight & Sturdy
- Drain (Flowrate: 35L/min)
- Tanking Kit (If Selected)
The shower tray gives the installer complete flexibility of building their own wet room with a fully tileable shower tray to suit the rest of your bathroom or en-suite.
The shower trays remove many of the problems with Damp Penetration especially with timber floors and also decreases heat loss figures due to its thermal insulation, this is also the case on solid screed floors but instead stops the heat from dispersing into the screed.
The Thermopanel Tanking Kit which comes with the Shower Tray (If Selected) which creates a waterproof seal to create the wet room.
The Tanking Kit Contains:
- Waterproof Membrane to Cover 8m2 (2 Coats)
- 1L Acrylic Primer
- 10m Waterproof Membrane Tape
- 1 Internal Corner
- Silicone Sealant
- Gloves & Brush
GRADIENT FALL TO DRAIN
EASY INSTALLATION
Thermopanel Shower Trays are made from XPS insulation board which is a high density polystyrene.
Covered in a reinforced cementitious coating that provides a hard wearing robust surface perfect for tiling.
Thermopanel Shower Trays feature a pre-made 2% gradient fall to the drain.
Thermopanel produces all of the supplies required to easily install a highly functional wet room.
Fully trimmable by up to 50mm off each edge (equal amounts must be trimmed from each side).
Payment is typically by Paypal (please ensure that your delivery address is confirmed)
All prices include VAT at the current rate.
Delivery
Standard Delivery - 3 to 5 Working Days
Express Delivery - 1 to 2 Working Days
All our orders are dispatched via Royal Mail, APC Overnight Courier, Fedex or Fortec Pallet Network. All consignments will require a signature so please ensure that the delivery address will have someone available to sign for the goods.
Due to additional charges imposed by our couriers for deliveries to the Scottish Highlands, offshore islands and Northern Ireland, a surcharge may be levied to cover carriage to these areas (listed below). We advise customers to contact us for a final postage fee before finalising orders.
AB31 to AB38, AB41 to AB45, AB 51 to AB56, BT, FK19 to FK 21, HS1 to HS9, IV1 to IV28, IV30 to IV32, IV36, IV40 to IV49, IV51 to IV56, KA27 to KA28, KW1 to KW3, KW5 to KW17, PA20 to PA49, PA60 to PA78, PH1, PH5 to PH10, PH15 to PH26, PH30 to PH44, TR, GY & E1 to ZE3.
Uheat is a trading style of Pedarson Ltd (The Pedarson Group), a wholly family owned and managed company that was established in 2003.
Our business ethos from the very start has been (and always will be) based on offering the highest standards of customer service, together with a range of products that meet our stringent demands for utmost quality and value for money.
We pride ourselves on our approach to service and every time you contact us you can expect to receive professional and friendly advice. The combination of products and experience in the industry means we offer a level of service that we believe is unprecedented - and ensures that the trust placed in us by our customers to inspire, recommend, plan and supply supports our objective to build lasting business relationships based on sound advice and recommendation. The high level of repeat business we enjoy from both trade and retail customers would suggest we achieve this though we'll never rest on our laurels, as we strive constantly to enhance still further our product offering and service provision!
Uheat - a company proud of its products, proud of its service to customers, and proud of its experience in the industry.
Returns are gladly accepted, item must be in same condition as received. Buyer is responsible for all return shipping charges. Please request a return via ebay prior to returning an item.
Thermopanel Wetroom Shower Trays are split in half for easier transport and movability. There are some instances where getting our shower trays through challenging hallways or tight spaces becomes a problem, and this is where our new split trays come in. Being split down the middle allows you to get these trays into the required location with ease. Please ensure the middle of the tray is sealed when installing.
These lightweight shower trays are ideal if you're looking to create a stylish yet effective wetroom. The Thermopanel shower tray allows you to create a waterproof wet room or walk-in shower without having to use the traditional acrylic tray.
The Shower Trays contain the following items:
- Shower Tray of Choice
- Gradient Fall to Drain
- Easy & Quick to Install
- Lightweight & Sturdy
- Drain (Flowrate: 35L/min)
- Tanking Kit (If Selected)
The shower tray gives the installer complete flexibility of building their own wet room with a fully tileable shower tray to suit the rest of your bathroom or en-suite.
The shower trays remove many of the problems with Damp Penetration especially with timber floors and also decreases heat loss figures due to its thermal insulation, this is also the case on solid screed floors but instead stops the heat from dispersing into the screed.
The Thermopanel Tanking Kit which comes with the Shower Tray (If Selected) which creates a waterproof seal to create the wet room.
The Tanking Kit Contains:
- Waterproof Membrane to Cover 8m2 (2 Coats)
- 1L Acrylic Primer
- 10m Waterproof Membrane Tape
- 1 Internal Corner
- Silicone Sealant
- Gloves & Brush
Thermopanel Shower Trays are made from XPS insulation board which is a high density polystyrene.
Covered in a reinforced cementitious coating that provides a hard wearing robust surface perfect for tiling.
GRADIENT FALL TO DRAIN
Thermopanel Shower Trays feature a pre-made 2% gradient fall to the drain.
EASY INSTALLATION
Thermopanel produces all of the supplies required to easily install a highly functional wet room.
Fully trimmable by up to 50mm off each edge (equal amounts must be trimmed from each side).
Payment is typically by Paypal (please ensure that your delivery address is confirmed)
All prices include VAT at the current rate.
Delivery
Standard Delivery - 3 to 5 Working Days
Express Delivery - 1 to 2 Working Days
All our orders are dispatched via Royal Mail, APC Overnight Courier, Fedex or Fortec Pallet Network. All consignments will require a signature so please ensure that the delivery address will have someone available to sign for the goods.
Due to additional charges imposed by our couriers for deliveries to the Scottish Highlands, offshore islands and Northern Ireland, a surcharge may be levied to cover carriage to these areas (listed below). We advise customers to contact us for a final postage fee before finalising orders.
AB31 to AB38, AB41 to AB45, AB 51 to AB56, BT, FK19 to FK 21, HS1 to HS9, IV1 to IV28, IV30 to IV32, IV36, IV40 to IV49, IV51 to IV56, KA27 to KA28, KW1 to KW3, KW5 to KW17, PA20 to PA49, PA60 to PA78, PH1, PH5 to PH10, PH15 to PH26, PH30 to PH44, TR, GY & E1 to ZE3.
Uheat is a trading style of Pedarson Ltd (The Pedarson Group), a wholly family owned and managed company that was established in 2003.
Our business ethos from the very start has been (and always will be) based on offering the highest standards of customer service, together with a range of products that meet our stringent demands for utmost quality and value for money.
We pride ourselves on our approach to service and every time you contact us you can expect to receive professional and friendly advice. The combination of products and experience in the industry means we offer a level of service that we believe is unprecedented - and ensures that the trust placed in us by our customers to inspire, recommend, plan and supply supports our objective to build lasting business relationships based on sound advice and recommendation. The high level of repeat business we enjoy from both trade and retail customers would suggest we achieve this though we'll never rest on our laurels, as we strive constantly to enhance still further our product offering and service provision!
Uheat - a company proud of its products, proud of its service to customers, and proud of its experience in the industry.
Returns are gladly accepted, item must be in same condition as received. Buyer is responsible for all return shipping charges. Please request a return via ebay prior to returning an item.
