Application:

Works on engines 6-404 and 6-466 found in tractor models 4000 4010 4020 4040 4045 4230 4240 4250 4320 4430 4440 4450 4520 4620 4630 4640 4650 4840 4850 6076 6081 6466 7020 8430 8440 8450. Works on engines 6-404 and 6-466 found in combine models 6600 6602 6620 6622 7700 7720 7722 8820.

Function:

Use to simultaneously install the Teflon unitized seal and wear sleeve on the engine rear crankshaft flange

Material:

Constructed from high standard forged steel for strength, durability, and longevity; coated with black oxide finish for resistance to rust and corrosion. Never worry wear or damage to the tool!

Nice Design:

The driver acts as a pilot to install rear oil seal in the housing eliminating the need for a dial indicator to measure.

Satisfaction Guarantee:

If you're not satisfied with our products, simply return it for a full refund in 60 days. If you have any questions, please feel free to contact us and we will provide the best service.

Fitment information:

4630 8430 4040 4240 4440 4640 4840 8440 (4050 W/466 ONLY) 4250 4450 4650 4850 8450 4055 4255 4455 4555 4755 4955 4560 4760 4960 3010 3020 4000 4010 4020 4320 4520 4620 4230 4430 Many more AG & Industrial equipment using the 270 404 466 6076 7.6L 8.1L engines

Easy to Use:

 

Oil seal/wear sleeve (not include) assembly MUST be installed with the JDG476(85) Crankshaft Rear Oil Seal Installation Tool Set.

1. Apply a light coating retaining compound around the leading edge of crankshaft flange. Wipe away extra sealant. Installing Rear Oil Seal and Wear Sleeve.

2. Install JDG477 (85) Pilot (A) on end of crankshaft using the Allen head cap screws (B) supplied and tighten.

3. Start oil seal/wear sleeve assembly (C) overJDG477 (85) Pilot and crankshaft with open side of seal toward engine.

4. Position JDG478 Driver (A) so that hole in the crossplate goes over threaded stud of pilot. Install washerand nut on stud.

5. Tighten nut to draw JDG478 Driver in until cross bar bottoms on JDG477 (58) Pilot. When the tool bottoms,seal and wear ring assembly (B) will be correctly positioned.

6. Remove JDG476 (85) Tool Set from engine.

&.S&H will be determined based upon the SHIP TO address.

&.Please list your special requests (color, packages, etc.) in the NOTES SECTION when you make payment.

&.Items will be shipped within 1-3 business day when we received payment.

&.We only ship to confirmed ebay addresses. Your ebay address MUST MATCH your Shipping address.

&.We accept 60 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 60 days of receipt, and we shall be happy to exchange or refund.

&.Leave a message note in returned box quoting your item(s) ID and buyer ID.

&.All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.

&.It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.

&.Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return

&.Welcome to our store! We will reply your message within 24 hours Mon-Sat, and 48 hours on Sunday.

&.We maintain high standards of excellence 5-stars and strive for 100% customer satisfaction! PositiveFeedback is very important to us.

&.Pls contact us first before you leave Neutral or Negative feedback. We will do our best to solve the problem, thanks!

&.Any question,please don't hesitate to contact us by the ebay message.