Kit Includes

• APC-T550 Actuator Kit Gate Automation Electric Motor. Driveway Swing Gate Opener with No Limit (QTY: 2)
• APC Weatherproof Control Box with Built in Battery Compartment and 1.2m Power Cord (Ready to Plug In) (QTY: 1)
• APC Four Button Keyring Remote (QTY: 2)
• APC Wireless Double Push Button Switch with Key Isolation (QTY: 2)
• 65mm High Centre Driveway Rubber Gate Stop with Steel Base (QTY: 1)

Product Information

Heavy Duty Quick Operation Aluminum Telescopic Linear Actuator
Driveway Swing Gate Opener with No Limit

 

Engineered to be Fast, Powerful, and Quiet. The Heavy Duty 24V actuator is comprised of an aluminum piston housing and a stainless steel piston with an elegant light grey powder coat for a neutral non-obtrusive feel.

Universal left and Right Side installation.

Simple 2 wire low voltage system making this motor a breeze to install for all skill levels.

The system can handle light and heavy gates up to 125kg maximum weight each gate or up to 2m maximum length for each gate.

Engineered to last

 

Perfect gear cuts allows for an almost silent operation with no movement in the gear system.

Sealed bearings at each end of the gear set for a 100% smoothness and consistency every single cycle.

Ribbed casing for extreme rigidity and the ultimate holding strength with no flex whatsoever.

Emergency Clutch Override

 

The simplest of override systems simply slot in the key and turn towards the unlock icon to operate the gates manually. Once finished just turn back to the locked icon.

Actuator Dimensions

Specifications

Installation Geometry

Weatherproof Control Box

The CBSW24 series smart control panel is an easy to connect, simple to setup and feature rich control box vast amount of features as listed below:

 Fully weatherproof with a seal
 Pre Connected Weatherproof Glands for Wiring Connections
 Hinged door with a padlock slot for added security
 Pre-Wired and ready to plug into a regular 10A power point

 

System Features

 Automatic Setup Feature to learn the Ramp Up and Slow Down points of the gates
 Automatic Feature Learning will learn all features of the remote with a simple pairing process
 Ultra High Security Rolling Code remote system allows for the highest form of security for entry to your property
 Adjustable Automatic Close time up to 3 minutes
 Pedestrian Function allows for only one of the gates to be operated, this can be toggled by remote, keypad or push button
 Second Motor Delay Time, the second gate motor can operate simultaneously with the first gate motor or be delayed by 3 to 5 seconds.
 

Safety Features

 Adjustable Over current adjustments
 Safety Sensor connection input
 Automatic Courtesy Light Output

 

Special Features

 Party mode: The automatic closing can be cancelled using button 3 on the remote control buttons when expecting a visitor to arrive, reversing a trailer and numerous other uses.
 Service Gate Function (12V 250mA max.). Using the second lock output will allow the user to power and control a second electric striker installed on a pedestrian access gate the second lock is powered from the control panel and controlled using button 4 on the remote. APC Wired and wireless Accessories can also be use to control the Lock 2 function.

Accessories Compatibility

 Constant 24V DC Accessories Output
 Switched 24V DC Output for closing direction (used for safety devices to conserve power, powered on when required)
 Open/Stop/Close Inputs for Single Gate Operation and Double Gate Operation
 Loop Detector Connection Input for an Open Only Toggle along with a return to open if closing
 Smart Opening & Closing LED indicators: Green LED on during opening and Red LED on during the closing
 Automatic Electric & Magnetic Lock Output

Controlling Options

Any or all of the following may be connected to operate the gate

 Remote controls
 Entry and Exit push button with isolation key switches (Wired and Wireless Options Available)
 Keypads (Wired and Wireless Options Available)
 Exit/entry sensors
 Intercom system with dry contact output
 Automatic switching timer
 WiFi Control System (App Based Control)
 GSM Control Systems (Mobile Call/SMS based Control)

Remote Features

Specifications

Wireless Double Push Button with Isolation Key

The wireless double push button switch is a simple and easy to use method to operate the gate for full gate operation and also pedestrian function.

It is mounted in the general area of the gate and can be isolated by using the supplied keys without affecting the rest of the system, this is handy if you want to continue using the remotes or any other method of operation but wish to stop use of the push button itself.

The wireless push button communicates with the control board using the same rolling code 433mhz frequency as the remote thus eliminating the need for any extra add ons. If required the wireless push button can be upgraded to a wireless keypad for higher access security using pin number and can have diffrent pin codes for both the full gate operation and pedestrian function.

65mm Rubber Gate Stop

The supplied 65mm rubber gate stop with steel base is used to for the gate alignment and tension whilst they are in the closed position, it also allows the gates to be mounted up to 50mm off the ground.

Being that the minimum vehichle height from the ground is 100mm it will not interfere with the vehichle. In the case that the vehichle was lower than the typical minimum the stopper would not cause any damage as it is constructed from solid rubber but retains its general strength from the steel plate used at the bottom side contacting the driveway.

 

 

65mm Rubber Gate Stop Dimensions