TORMEK Tool Jigs, Supports, Angle Setters & Other Machine Accessories

PA-70 Honing Compound

  • Used with all Tormek leather honing wheels.
  • Gives a fine, polished finish.
  • Average grit 3 microns.
  • Moisturizes the leather of the leather honing wheel.
  • Contains 70 g (0.15 lb) of honing compound.

SP-650 Stone Grader

  • Adjust the grit of your grindstone to an equivalent of between 220 and 1000 grit.
  • Works with your original grindstone as well as the SB-250 Blackstone Silicon.
  • The fine side can be used to clean your Japanese Waterstone.
  • Easy to use, just press against the grindstone.
  • Works with the Tormek T-8, Tormek T-4 and older models.

TT-50 Truing Tool

  • Keeps your grindstone round and flat.
  • High precision and quality with a patented design.
  • Easy to use.
  • Fits all Tormek machines with a universal support.

ADV-D Diamond Exchange Tip for TT-50

  • Diamond exchange tip for the TT-50 Truing Tool.
  • Makes it easier to remove the very top layer of the grindstone and gives a better result than with a worn diamond tip.
  • Easy to mount.
  • Fits both new and older versions of the TT-50 Truing Tool.

SVS-38 Short Tool Jig

  • Precise sharpening of your short carving tools.
  • User-friendly jig that provides very stable sharpening.
  • Works with both Tormek T-4 and Tormek T-8, as well as older models.

SVS-50 Multi Jig

  • It's like two jigs in one – sharpen all your woodturning chisels, parting tools, roughing gouges and more.
  • Easy to use – just turn the jig over to grind the second bevel without resetting the jig.
  • Works with both Tormek T-4 and Tormek T-8, as well as older models

SVM-00 Small Knife Holder

  • Precision sharpening for even your smallest knives.
  • Easy to use.
  • Complements the KJ-45 Centering Knife Jig.
  • Works with both Tormek T-4 and Tormek T-8, as well as older models.

SVD-186 R Gouge Jig

  • Sharpens all your gouges and other tools with complex shapes, such as V-gouges and carbide woodturning cutters.
  • Precise setting for exact repeatability with the TTS-100 Turning Tool Setter.
  • Use Tormek's recipes for various sharpenings, or create your own.
  • Works with both Tormek T-4 and Tormek T-8, as well as older models.

SVD-110 Tool Rest

  • Make your scrapers sharper than when they were new.
  • Really easy to set up and use.
  • Versatile jig that can be set to sharpen a variety of tools.
  • Works with both Tormek T-4 and Tormek T-8, as well as older models.

KJ-45 Centering Knife Jig

  • Centers the knife in the jig for optimal, symmetrical results.
  • Centers tapered knives and holds them firmly.
  • An extra stop for tall knives, such as cleavers.
  • Ability to shape a slightly convex edge with a movement between the two stops.
  • Robust design – zinc-cast clamps and durable composite handle.
  • Well-balanced – most of the weight is focused to the clamps, which provides a more balanced feel when sharpening.
  • Slides smoothly with low friction against the universal support.
  • Works with both Tormek T-4 and Tormek T-8, as well as older models.

KJ-140 Wide Centering Knife Jig

  • Centers long, flexible knife blades in the jig for optimal, symmetrical results.
  • The 5 1/2" wide clamp stabilizes flexible blades.
  • Centers tapered knives and holds them firmly.
  • An extra stop for tall knives, such as cleavers.
  • Ability to shape a slightly convex edge with a movement between the two stops.
  • Robust design – zinc-cast clamps and durable composite stops.
  • Well-balanced – most of the weight is focused on the clamps, which provides a more balanced feel when grinding.
  • Slides smoothly with low friction against the universal support.
  • Works with both Tormek T-4 and Tormek T-8, as well as older models.

 SC-60  Scissors Jig


SE-77 Square Edge Jig

  • Make your plane irons and chisels sharper than when they were new.
  • Easy to set up and use.
  • Micro adjust screws to compensate for tiny deviations in tool design.
  • Possibility of rounding off the corners of your edge slightly to prevent scratches in the timber you're planing.
  • Works with both Tormek T-4 and Tormek T-8, as well as older models.

AX-40 Axe Jig

  • Easy to use.
  • Precise and symmetrical sharpening.
  • Versatile - sharpens convex, flat or concave bevels.
  • Fits all types of axes.
  • Works with the Tormek T-8, Tormek T-4 and older models.

KS-123 Knife Angle Setter

  • Set the exact sharpening angle for any type of knife.
  • Easy to use - set the angle in three easy steps.
  • Sets an exact sharpening angle even for tapered blades.
  • Self-adjusting for the diameter of the grinding wheel.
  • Compatible with all Tormek knife jigs.
  • Works with the Tormek T-8, Tormek T-4 and older models.

TTS-100 Turning Tool Setter

  • Easy setting for sharpening woodturning tools.
  • Enables precise repeatability when sharpening, time after time.
  • Easy to use.
  • Used with the SVD-186 R Gouge Jig and SVS-50 Multi Jig.
  • Works with the Tormek T-8, Tormek T-4 and older models

WM-200 AngleMaster

  • Measures the existing bevel angle of the tool.
  • Set the jig to the desired sharpening angle before sharpening.
  • Easy to use.
  • Works on grinding wheels from 150 mm (5 7/8") to 250 mm (9 7/8") in diameter.
  • Works with the Tormek T-8, Tormek T-4 and older models.

MSK-200 Stainless Steel Shaft with EzyLock

  • Replace your old main shaft and let your Tormek live on.
  • Stainless steel parts for maximum service life.
  • Easy to replace.
  • Fits the Tormek T-4, Tormek T-3, Tormek 1200 and older models with a 200 mm (7 7/8") grinding wheel.

MSK-250 Stainless Steel Shaft with EzyLock

  • Replace your old main shaft and let your Tormek live on.
  • All parts are made of stainless steel to ensure maximum service life.
  • Easy to replace.
  • They fit the Tormek T-8, Tormek T-7, Tormek 2000 and older models with a 250 mm (9 7/8") diameter grinding wheel.

XB-100 Horizontal Base

  • Horizontal precision mounts for older Tormek machines.
  • Allows horizontal sharpening where the grinding wheel rotates away from the edge instead of into it.
  • Allows honing with jigs on the universal support for maximum precision.
  • Fits the Tormek 2000, Tormek 1200 and older machines from before 8 August 2001.

BGM-100 Bench Grinder Mounting Set

  • Reshape the tool profile quickly and easily on your bench grinder.
  • Allows you to use the SVD-186 R Gouge Jig, SVS-50 Multi Jig, SVD-110 Tool Rest and TTS-100 Turning Tool Setter on your bench grinder.
  • Keep the same jig setting when sharpening on your Tormek as when you shaped the tool on the bench grinder.
  • Easy to use.
  • Works with most standard bench grinders with the correct grinding wheel.

RB-180 Rotating Base

  • Rotate your machine 180°.
  • More ergonomic sharpening.
  • Saves space – you don't need to be able to walk around the machine.
  • Fits the Tormek T-8, Tormek T-4 and some older models.

RM-533 Rubber Work Mat

  • Generous natural rubber mat reduces vibrations.
  • Adheres well to the surface it's on – doesn't slip.
  • Retains spilled water, honing compound and other dirt.
  • Fits perfectly on your TS-740 Sharpening Station – where it's included.
  • Fits all Tormek machines.

MH-380 Machine Cover

  • Protects your Tormek from dirt, dust and shavings when not in use.
  • Made from 100% breathable cotton.
  • Stylish and neat design.
  • Fits all Tormek machines.

AWT-250 Water Trough for T-7

  • Built-in magnet that traps steel particles.
  • Drip cover for long tools.
  • Easy to mount.
  • Fits the Tormek T-7, Tormek 2000 and older models with a 250 mm (9 7/8") grinding wheel.

ACC-150 Anti-Corrosion Concentrate

  • Added to the water for water-cooled sharpening with diamond grinding wheels for rust prevention.
  • Can be used in the water with grindstones as well, to reduce waste.
  • Contains two bottles of 150 ml each.
  • Provides some rust protection for your tools that are sharpened with treated water.

US-103 Universal Support with Micro Adjust T-4

  • The basis for Tormek's broad jig system.
  • Guarantees precision and repeatability.
  • Micro Adjust for quick and precise setting.
  • Fits the Tormek T-4, Tormek T-3 and Tormek 1200.

US-105 Universal Support with Micro Adjust T-8

  • The basis for Tormek's broad jig system.
  • Guarantees precision and repeatability.
  • Micro Adjust for quick and precise setting.
  • Fits the Tormek T-8, Tormek T-7 and Tormek 2000.

US-430 Extended Universal Support

  • Longer support for sharpening long tools.
  • Taller support for sharpening tall tools.
  • Easy to mount– just insert into the precision mounts.
  • Fits the Tormek T-8, Tormek T-7, Tormek T-4, Tormek T-3 and older models.

MB-102 Multi Base

  • Allows you to sharpen a perfectly flat bevel on the flat side of your diamond grinding wheel.
  • Great for sharpening flat bevels on luthier knives, Kiridashi knives, V-gouges, chip-carving knives, Japanese planes, and more.
  • Allows frontal vertical mounting of universal support - better access for sharpening knives edge trailing, and for guided honing using knife jigs.
  • Fits the Tormek T-8, Tormek T-4, and older models.

LA-120 Profiled Leather Honing Wheel

  • Polishes the bevel and deburrs the edge on the inside of arched edges.
  • Maintains your tools between sharpenings.
  • Quality cowhide that lasts year after year.
  • Fits the Tormek T-8, Tormek T-4 and older models.

LA-124 Set of Narrow Exchange Discs

  • Quality cowhide that lasts year after year.
  • Fits the LA-120 Profiled Leather Honing Wheel.
  • Hones arched edge tools with a smaller radius or tighter angle.

For Any Further Information Please Contact Us