Product type : Korean Wallpaper

wallpaper type : paper backed

Chacteristics : Water Based Ink, 99% Antiviral, Aqueous Printed Layer, Air Field Treatment Layered, Anti Bacterial Treatment Layer

UOM : Rolls

Company website : www.91degreecurtain.com.my

Company register name : 91 Degree Interior (002996287-W)

Company Address : L1-49, The Link 2 Bukit Jalil, Kuala Lumpur, Malaysia

HANGING INSTRUCTION

Korean wallpaper Roll size: 1.06m x 15.5m

Surface preparation

Walls should be smooth, dust-free and dry before applying the paste.

We recommend using lining paper if the surface is not even.

===============================

1. What is the roll size of Korean Wallpaper ?

=1.06m (Width) x 15.6m (Length)

2. How many Sqft can 1 Korean Wallpaper roll cover ?

=A full Korean Wallpaper roll size is 177.75 Sqft. However, due to wastage and pattern matchings, it can cover approximately 150sqft of wall area, including minor wastage.

3. What backing is the Korean Wallpaper ?

=Paper Backing

4. What is the installation method for this roll ?

=Firstly, you will need to apply glue on the back of the wallpaper (Paste on Paper) and let it sit for 15minutes for the glue to absorb. Thereafter, paste the wallpaper onto the wall accordingly.

APPLY IF THE WALL…!!!

SITUATION 1

 1. Powdery Wall

 2. Painted with Emulsion paint

 3. Uneven Wall ( make sure it is even )

 4. Plastered Wall

INSTRUCTION TO APPLY

 1. Scrap the wall surface.

 2. Plaster the surface.

 3. Apply the ‘Wall Sealer’ from 1 direction ONLY.

 4. After the 1st coating, let it dry for 2-3 hours.

 5. Apply the 2nd coating; let it dry for another 2-3 hours.

 6. Apply Water Based Paint / ‘Grey Water’(灰水)

SITUATION 2

 1. Tiles Surface

 2. Plywood

INSTRUCTION TO APPLY

 1. Fill up the gap in between the tiles.

 2. Plaster to even the surface.

 3. Apply the ‘Wall Sealer’ from 1 direction ONLY.

 4. After the 1st coating, let it dry for 2-3 hours.

 5. Apply the 2nd coating; let it dry for another 2-3 hours.

 6. Apply Water Based Paint / ‘Grey Water’(灰水)

SITUATION 3

 1. Partition board

 2. Gibson board/Dry wall

INSTRUCTION TO APPLY

 1. Remove the paper layer from partition board or applied the recommended wall sealer

 2. Fill up the gap between the joins of Gibson board

 3. Apply the ‘Wall Sealer’ from 1 direction ONLY.

 4. After the 1st coating, let it dry for 2-3 hours.

 5. Apply the 2nd coating; let it dry for another 2-3 hours.

 6. Apply Water Based Paint / ‘Grey Water’(灰水)

SITUATION 4

 1. Glass surface

INSTRUCTION TO APPLY

 1. Apply the ‘Wall Sealer’ from 1 direction ONLY.

 2. After the 1st coating, let it dry for 2-3 hours.

 3. Apply the 2nd coating; let it dry for another 2-3 hours.

 4. Apply Water Based Paint / ‘Grey Water’(灰水)

SITUATION 5

 1. Leakage Wall or Moisture Wall (not recommended for wallpapering)

 2. Advice to use moisture meter to test the moisture level.

INSTRUCTION TO APPLY

 1. Rectify the problem by hiring specialist.

 2. Usually the specialist will apply appropriate water sealer depend on situation.

 3. Apply the ‘Wall Sealer’ from 1 direction ONLY.

 4. After the 1st coating, let it dry for 2-3 hours.

 5. Apply the 2nd coating; let it dry for another 2-3 hours.

 6. Apply Water Based Paint / ‘Grey Water’(灰水)