We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.
Agilent E8363C 10 MHz - 40 GHz PNA Vector Network Analyzer w/ Opts 014/016/UNL
Agilent E8363C 10 MHz - 40 GHz PNA Vector Network Analyzer with Options 014/016/UNL - KEYSIGHT CALIBRATED!
You are bidding on an Agilent / Keysight E8363C 10 MHz - 40 GHz PNA Vector Network Analyzer with Options 014 (Configurable Test Set), 016 (Add Receiver Attenuators) and UNL (Extended Power Range with Bias Tees) Installed. It will arrive with a fresh manufacturer calibration with full test data performed by Keysight Technologies!
The Agilent E8363C Network Analyzer is part of Agilent's PNA series of network analyzers (Performance Network Analyzers) and features the highest levels of accuracy for your critical needs. The Agilent E8363C has a wide frequency range of 10 MHz to 40 GHz and has 2-Ports (4 with the N4420B Test Set) and 4 Receivers. An integrated S-parameter test set with four receivers allows true TRL calibration. TRM/LRM calibration, on-wafer, in-fixture, waveguide and antenna measurements are all part of this Network Analyzers capabilities. A large 8.4 LCD front panel display with touch screen (1024x768 resolution) is integrated into the instrument. Enhanced Windows graphical user interface. Hard keys and soft keys for simple operation without a mouse are featured. The Agilent N4420B S-parameter test set combined with 2-port PNA or PNA-L network analyzer and Option 550, offers a complete solution for 4-port measurements. THIS SYSTEM HAS A LIST PRICE OF OVER 140K!
Agilent E8363C Features:
< 26 usec/point measurement speed
Measurement channels: 32 independent measurement channels
Measured number of points per sweep: User definable from 2 to 20,001
110 dB Dynamic Range
Amplifier gain compression, harmonic, IMD, and pulsed-RF
Mixer conversion loss, return loss, isolation, and absolute group delay
Trace noise: < 0.006 dB rms at 1 kHz IF bandwidth standard and with option 14
Nominal power: -12 dBm standard, -17 dBm with options 14 and UNL
Frequency resolution: 1 Hz
Phase noise: -50 dBc at 1 kHz offset nominal
Test port noise floor: < -114 dBm 10 Hz IF bandwidth standard
IF bandwidth range: 1 Hz to 40 kHz, nominal
RF connectors 2.4mm male (50ohm)
VGA video output-15-pin mini D-Sub
Interfaces:
-GPIB-Two ports: dedicated controller and dedicated talker/listener
-USB-1 port on front panel and 4 ports on rear panel
-LAN-10/100 BaseT Ethernet; 8-pin configuration auto selects
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
We will accept payment for this item by company check, cashier’s check and wire transfer only.
If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out our other auctions for more great deals on test and measurement equipment.
Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.
About Us
Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
Payment
We accept payment by company check, bank transfer and Paypal (for items valued below $1500 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request. Spaulding Surplus 12829 Landale Street Studio City, CA 91604
Shipping
All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment.
Terms
All items sold on Ebay come with a standard 30 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment.
Returns
Spaulding Surplus typically offers a 30 day right of return for equipment received damaged or non-functional. However, Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project. The verification of product capability is the sole responsibility of the buyer. PO's and purchases cancelled due to insufficient instrument capability, buyer's remorse or loss of order are always subject to a minimum 20% restocking fee. A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab.
Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.
