FUSE PULLER: 

BLADE, CARTRIDGE 

OR DUAL.

😲 SAVE SOME MONEY:  Consider purchasing more than one fuse puller (one of each, several or a combination).  Buyers purchasing two or more fuse pullers will receive and additional percentage off.  Buyers purchasing three or more fuse pullers will save even more! 

😲 SAVE ON SHIPPING TOO?:  Absolutely!  Buyers in the United States and its territories will pay a FLAT SHIPPING FEE of only $5.50 - - whether you buy one fuse puller or one-hundred. 

PLEASE NOTE:  The yellow fuse pullers are out of production (the manufacturer is no longer making these popular fuse pullers) so when they're gone, they're gone. 🤔

QUANTITY꞉  ONE high-quality fuse puller.  Your choice of either the Model FP-1 (with metal clip) or Model 32000 (four-way) or Model DUAL (which accommodates both blade and cartridge fuses). 

BRAND / MANUFACTURER꞉  Varies.

ABOUT THE FP-1 FUSE PULLER꞉  ONE high-quality Bussmann FP-1, double-ended, dual-size, plastic fuse puller with sliding metal clamp / sleeve.  Manufactured in the United States.

FP-1 APPLICATIONS꞉  Used to remove and insert glass and ceramic fuses, such as AGA, ABC, SFE, AGW, AGX, AGC, AGY, AGU, GBC, GMA, MDL fuses, etc.  Also works with some blade fuses.

FP-1 MANUFACTURER'S INSTRUCTIONS꞉  “TO REMOVE FUSE꞉ Put metal clamp in center of puller.  Push end of puller over fuse.  Push clamp forward to lock on fuse.  Pull out fuse.  TO INSERT NEW FUSE꞉  Insert new fuse in puller and lock in place with clamp.  Push fuse in clip and release clamp to remove puller. (Small end of puller is for short fuses).”  

FP-1 END SIZES꞉  The large end measures approximately 0.295” wide.  The small end measures approximately 0.14” wide.

FP-1 FUSE PULLER DIMENSIONS꞉  The fuse puller measures approximately 0.31” wide, 0.59” tall and 4.16” end-to-end. The metal clamp measures approximately 0.43” wide. The fuse puller weighs approximately 0.5 ounce, 13 grams.

FP-1 BODY COMPOSITION꞉  Molded thermoplastic; sliding metal clip.  

FP-1 SPECIAL FEATURES꞉  Two different sized ends:  One end for standard size fuses, one end for very short fuses.

ABOUT THE 32000 FUSE PULLER꞉  ONE high-quality Bussmann 32000, bright-yellow (easy to find in your drawer or tool box!) four-sided, plastic fuse puller.  Manufactured in the United States.

32000 APPLICATIONS꞉  Used to remove and insert “blade fuses.”  Also known as a “fuse insertion / extraction” tool.

32000 MANUFACTURER'S INSTRUCTIONS꞉  “TO REMOVE FUSE꞉  Select the proper end of the fuse puller for the blade fuse to be removed. Push that end of puller over fuse.  Pull out fuse.   

32000 END SIZES꞉  The largest end measures approximately 0.98” wide.  The smallest end measures approximately 0.31” wide.

32000 FUSE PULLER DIMENSIONS꞉  The fuse puller measures approximately 0.35” thick by 2.36” across (the short side) by 2.475” across (the longest side). The fuse puller weighs approximately 0.2 ounce, 7 grams.

32000 BODY COMPOSITION꞉  Molded high-temperature resilient Nylon 6/6 (105°C).

32000 SPECIAL FEATURES꞉  Four different sized ends꞉ One end for ATC fuses, one end for MINI CB fuses, one end for MINI FUSE and one end for ATC CB fuses. Common platform for any style.  Eliminates design changes when protection requirements change.  Positive stop locking action. Tight grip allows devices to be removed and inserted.

ABOUT THE DUAL FUSE PULLER꞉  ONE generic, red-orange (easy to find in your drawer or tool box!) dual fuse puller.  The "blade end" operates as a pair of "tweezers" under pressure (with ridges) to grip the blade fuse rims as well as some cartridge fuses. 

DUAL APPLICATIONS꞉  One end accommodates blade fuses (and some cartridge fuses) the other end accommodates 5mm fuses (and can be used to pry loose some other size cartridge fuses). 

DUAL FUSE PULLER DIMENSIONS꞉  The fuse puller measures approximately 0.34” thick by 0.51” wide (in the middle) by 4.1” across. The fuse puller weighs approximately 0.2 ounce, 7 grams.

DUAL BODY COMPOSITION꞉  Molded thermoplastic.

DUAL SPECIAL FEATURES꞉  Can accommodate a variety of different fuses and sizes.

PLEASE NOTE꞉  Electrocution hazard.  Always use caution when using any fuse puller with energized circuits.  We strongly recommend de-energizing all circuits, power sources, batteries and discharging capacitors prior to working on electrical components.

A LITTLE ABOUT BUSSMANN꞉  Over 100-years ago, the Bussmann brothers started producing fuses in their home's basement and garage.   The Bussmann corporation began in a St. Louis garage in 1914 due to the vision of the Bussmann brothers: Joe, Al, Frank, Lee and Harry. The concept for the company actually went back to the 1904, when the five brothers, were fascinated by the electric lights at the World’s Fair.  Since that time, Bussmann has grown from providing fuses for the world's first automobiles and World War II aircraft, to offering more than 30,000 products. During their first 100-years, Bussmann received more than 3,000 utility and design patents.  Today, Bussmann is a division of Eaton / Cooper and is still located in St. Louis, Missouri.

SHIPPING꞉  Buyers residing in the United States or its territories will pay a flat fee of $5.50 for the first fuse puller, and each additional fuse puller SHIPS FREE! For buyers residing outside of the United States, shipping is calculated based on weight, package size and destination (i.e. “DIM”).  This item ships by USPS First Class or Priority Mail.