A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

Included Free CTMULTILEAD.2 Stereo Patch Lead

Compatible with following vehicles:

Car Make / Model	Year	Remarks
Renault Trafic	2015 onwards	III
Renault Twingo	2014 onwards	III
Renault Master	2015 onwards

Connection: OEM Specific

PATCH LEAD This interface connects a compatible car stereo with a joystick input (blue  line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.

CTMULTILEAD.2 Universal head unit connection lead is suitable for:

• Alpine (3.5mm jack)
• Beat (single wire connection)
• Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
• Clarion (3.5mm jack)
• Grundig
• JVC (3.5mm or single wire)
• Kenwood (single wire)
• LG (3.5mm jack)
• Nakamichi (single wire connection)
• Panasonic  (single wire but NOT AV units)
• Philips (single wire connection)
• Pioneer (3.5mm jack)
• Sony (3.5mm jack)
• Zenec  (single wire)
• Other Chinese SWC learning head units

Notes:

• You can simply cut the loops / wires to select which brand you are fitting.
• Supplied with instruction sheet

TECHNICAL NOTE

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

Please note: This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX head units / Older Kenwood units with the DIN plug. For those models you need to purchase the lead from our eBay Store. Click here for additional patch leads

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.