PLEASE NOTE:
All items will be shipped and delivered by the following services: Evri, DX, DHL and Royal Mail. The service used is dependent on location of delivery, weight of parcel, size of parcel, value of contents and carrier restrictions of transport.

Rustins Quick Dry ASAP All Surface All Purpose Paint Satin Grey is a water-based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. Can be used indoors and outdoors on multiple surfaces. It is touch dry in 30 minutes and re-coating time is approximately 2-3 hours. 1 litre covers approximately 12-14 square metres in 1 coat.  

Size: 50ml Touch Up

Usage Instructions: 
Preparation: The surface must be clean and free from dust and any loose paint, wax, grease, dirt, fungal growth or solid matter likely to interfere with the adhesion of the paint. Do not apply to damp areas. Sources of damp should be eliminated before applying the paint. The product can be applied to surfaces without the need of a primer. However on metal improved protection will be achieved if an anti-corrosive metal primer such as Rustins Quick Dry Red Oxide Primer or Rustins Galvanised Primer is first applied. The product can also be applied directly to timber but a suitable primer such as Rustins Quick Dry Primer and Undercoat will help to reduce the appearance of the grain of the timber if this is important. 

Application: STIR WELL BEFORE USE. Do not thin the product. Apply evenly by brush. One or two coats should be applied allowing 3-4 hours between coats in warm dry conditions. Cold damp conditions will significantly extend the drying times. Do not apply outdoors when foggy or likely to rain before the paint has dried. Coats: 1 coat is usually sufficient. A second coat may be applied for improved durability. Drying Time: Approximately 30 minutes, depending on temperature and humidity. 

Re-coating Time: Approximately 3-4 hours Application Temp: Ideally 15-25°C. Do not apply if rain imminent. Coverage: 12-14 sq.metres per litre 1 coat. Maintenance: The surface may be washed with a mild detergent solution and a scrubbing brush and recoated if necessary. Compatibility: May be applied to a wide range of surfaces and paints but test for compatibility and adhesion if in doubt.