| |
|
|
| |
Description |
|
|
Handheld Digital Oscilloscope + Waveform Generator + Multimeter
Bandwidth:40MHz
250MSa/s(Single-channel) 125MSa/s(Dual-channel)
Ultra-low power design
2CH+DMM+AWG
Large-capacity lithium battery power supply
|
|
|
| |
| |
Specification |
|
|
| |
|
|
|
|
| Oscilloscope Mode |
| Bandwidth |
|
40MHz |
|
|
| Channel |
|
2CH+DMM+AWG |
|
|
|
| Horizontal |
| Sample Rate Range |
250MSa/s(Single-channel), 125MSa/s(Dual-channel) |
| Waveform Interpolation |
(sin x)/x |
| Record Length |
Max. 6K for single-channel; 3K samples per dual-channel |
| SEC/DIV Range |
5ns/div~500s/div 1, 2, 5 sequence |
| Vertical |
| A/D Converter |
8-bit resolution,each channel sampled simultaneously |
| VOLTS/DIV Range |
10mV/div~10V/divat input BNC |
| Bandwidth Limit, typical |
20MHz |
|
| Low Frequency Response (-3db) |
≤10Hz at BNC |
| Rise Time at BNC, typical |
≤5ns |
| DC Gain Accuracy |
±3% for Normal or Average acquisition mode, 10V/div to 10mV/div |
| Note: Bandwidth reduced to 6MHz when using a 1X probe. |
| Acquisition |
| Acquisition Modes |
Normal |
| Trigger |
| Type |
Edge |
| Mode |
Auto, Normal, single |
| Level |
±4 divisions from center of screen |
| Trigger Level Accuracy |
0.2div × volts/div within ±4 divisions from center of screen |
| Slope |
Rising, Falling, Rising & Falling |
| Source |
CH1/CH2 |
| Input |
| Coupling |
DC, AC or GND |
| Input Impedance, |
25pF±3 pF, 1MΩ±2% |
| DC coupled |
| Probe Attenuation |
1X, 10X |
| Supported Probe Attenuation Factors |
1X, 10X, 100X, 1000X |
| Maximum Input Voltage |
150VRMS |
| Measurement |
| Cursor |
Voltage difference between cursors: △V |
| Time difference between cursors: △T |
| Automatic Measurements |
Frequency, Amplitude |
| Arbitrary Waveform Generator Mode |
| Waveform Frequency |
Sine: 1Hz~25MHz |
- |
- |
| Square: 1Hz~10MHz |
- |
- |
| Ramp: 1Hz~1MHz |
- |
- |
| EXP: 1Hz~5MHz |
- |
- |
| Sampling |
250MSa/s |
- |
- |
| Amplitude |
2.5Vpp(50Ω) |
- |
- |
| 5Vpp(High impedance) |
- |
- |
| Frequency Resolution |
0.10% |
- |
- |
| Channel |
1CH waveform output |
- |
- |
| Waveform Depth |
512Sa |
- |
- |
| Vertical Resolution |
12 bit |
- |
- |
| Output Impedance |
50 Ω |
- |
- |
| DMM |
| Maximum Resolution |
4000 Counts |
| DMM Testing Modes |
Voltage,Current,Resistance,Capacitance,Diode &On-Off |
| Maximum Input Voltage |
AC:600V, DC: 800V |
| Maximum Input Current |
AC: 10A, DC:10A |
| Input Impedance |
10MΩ |
| Measurement Term |
Range |
Accuracy |
Resolution |
| DC Voltage |
400.00mV |
± (0.8% + 5) |
100uV |
| 4.000V |
1mV |
| 40.00V |
10mV |
| 400.0V |
100mV |
| 600.0V |
± (1% + 2) |
1V |
| Overload protection: 400mV: 250V, other: 600Vrms. |
| AC Voltage |
4.000V |
± (1.2% + 5) |
1mV |
| 40.00V |
10mV |
| 400.0V |
100mV |
| 600.0V |
±(1.5% + 5) |
1V |
| Frequency: 40Hz~400Hz; |
| Frequency of 400V and 600V: 40Hz~100Hz |
| DC Current |
40.00mA |
± (1% + 2) |
10uA |
| 200.0mA |
± (1.5% + 2) |
100uA |
| 4.000A |
± (1.8% + 2) |
1mA |
| 10.00A |
± (3% + 2) |
10mA |
| Overload protection: |
| self restoring fuse: 200mA/250V, 4A and 10A range no fuse. |
| AC Current |
40.00mA |
± (1.3% + 2) |
10uA |
| 400.0mA |
± (1.8% + 2) |
100uA |
| 4.000A |
± (2% + 3) |
1mA |
| 10.00A |
± (3% + 5) |
10mA |
| Frequency: 40Hz~400Hz; |
| self restoring fuse: 200mA/250V, 4A and 10A range no fuse. |
| Resistance |
400.0Ω |
±(1% + 3) |
0.1Ω |
| 4.000KΩ |
±(1.2% + 5) |
1Ω |
| 60.00KΩ |
10Ω |
| 400.0KΩ |
100Ω |
| 4.000MΩ |
1KΩ |
| 40.00MΩ |
± (1.5%±3) |
10KΩ |
| Overload protection: 220Vrms |
| Capacitance |
40.00nF |
±(3% + 5) |
10pF |
| 400.0nF |
100pF |
| 4.000uF |
1nF |
| 40.00uF |
10nF |
| 100.0uF |
100nF |
| Overload protection: 220Vrms |
| Diode |
0V~2.0V |
| On-Off |
<50Ω |
| General Specifications |
| Display |
| Display Type |
2.8 inch64K color TFT |
| Display Resolution |
320 horizontal by 240 vertical pixels |
| Display Contrast |
Adjustable |
| Power Supply |
| Supply Voltage |
100V-240VAC, 50Hz-60Hz; DC INPUT: 5VDC, 2A |
| Power Consumption |
<2.5W |
| Fuse |
T, 3A |
| Battery |
2600mA*2 |
| Environmental |
| Operating Temperature |
0~50 °C (32~122 °F) |
| Storage Temperature |
-40~+71 °C (-40~159.8 °F) |
| Humidity |
≤+104℉(≤+40°C): ≤90% relative humidity |
| 106℉~122℉ (+41°C ~50°C): ≤60% relative humidity |
| Cooling Method |
Convection |
| Altitude |
Operating and |
3,000m (10,000 feet) |
| Nonoperating |
| Mechanical Shock |
Random Vibration |
0.31gRMS from 50Hz to 500Hz, 10 minutes on each axis |
| Nonoperating |
2.46gRMS from 5Hz to 500Hz, 10 minutes on each axis |
| Operating |
50g, 11ms, half sine |
| Mechanical |
| Dimension |
199 x 98x 40mm (L x W x H) |
| Weight |
624g |
| Standard Accessories |
|
Probe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1 |
|
|
Oscilloscope + Waveform Generator + Multimeter: This multi-purpose station own three universal test instrument functions. It is outgoing right-hand product for engineers.
Intelligent charging control: Its lithium batteries can be recharged byeither high current-5V/2A or ordinary computer USB interface. Allow while charging, while using, very convenient and handy;
Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months;
Large-capacity lithium battery power supply: Tesla style 18650 replaceable lithium battery power system, free from replace battery;
5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone;
AUTO one-key test: Magic tool and essential function for test newbie;
Volume small, one hand holding: The 45 degree suspension bracket design provide you a work station anywhere anytime; One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective;
Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free;
Its cursor measurement functionsupports time and voltage manual measurement, and measure the required waveforms accurately;
One-click switching its Chinese and English language menu;
Color LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify;
Minimalist keyboard design simplify operation, convenient to use;
Unibody casing: fine touch feeling, favorable impact resistance, outstanding heat resistance, easy to disassemble; Self-calibration function: free from level drift after long time unused;
Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test;
|
| |
|
|
| |
| |
Package Includes |
|
|
| 1.Handheld oscilloscope |
| 2.User instructions |
| 3.High Frequency Probe x 2 |
| 4.Power Cord |
| 5.Apporiate Plug Adapter For Your country |
|
|
|
| |
| |
Pictures |
|
|
|
| |
Shipping |
|
|
|
| 7-10 business days to be delivered. Other country please contact us for the shipping cost before your bidding. |
|
We always try our best to legally minimize your import duties (or GST or V.A.T. or
o
ther Taxes). In the most cases ,
t
here is no duty payable at all. However, if an
y additional c
harges generated for customs clearance must be borne by customers.
★Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.
★Please check with your country’s customs office to determine what these additional costs will be prior to bidding / buying.T
h
ese charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges. |
|
|
| |
|
|
| |
Payment |
|
| We accept Paypal only. |
 |
Serious bidders only, please. Orders will be cancelled and an unpaid item dispute filed if payment is not received within 10 days of purchase.
Shipping your order within 1-2 business day after your paypal payment! Please ensure your shipping address correct, precise, and detailed! |
|
|
| |
|
|
| |
Warranty |
|
|
 |
The item is guaranteed to be as Described! If, for any reason, you are not satisfied with your purchase, you may return the item (in good condition though) within 60 days, we'll be happy to make an exchange or issue a prompt and courteous refund. |
| PLEASE NOTE: SORRY, WE DO NOT REFUND OR REIMBURSE SHIPPING CHARGES! |
|
|
| |
|
|
| |
Service |
|
|
 |
| As a leading dental products supplier in China, we provide quality dental lab supplies, equipment at some of the most cost effective prices available on the market today. Our mission is simple, to deliver Quality, Value and Service to serve the needs of both private and clinic practices. |
| We always Value Your Satisfaction as the Most Important Thing! ! If, for any reason, you are not satisfied with your purchase,please don't be hesitate to let us know. |
| This item is BRAND NEW in the original factory box.We provide full one year warranty for this item. |
| |
| From orthodontics to oral surgery, your patients all have one thing in common: they demand the best professional dental care. We help you set the standard in dental care with confidence. |
| ★We offer a fast and friendly service. Customer satisfaction is very important to us and our feedback rating reflects this satisfaction. |
Ask a question now?
|
| ★If you have any questions our Customer Service staff welcomes you to contact us. We strive to answer all questions and resolve any problems as quickly as possible. |
 |
|
|
|
|
|
|
|
|
