Features:
Brand new.
Perfect for small models and really tight places!.
This distribution is the ideal solution for the model train to supply all lighting.
Be with dimmer control for LED lights and can adjust light brightness.
Specifications:
Brand:Evemodel.
Dimensions:Approx.95mm(L) x30mm(W) x 15mm(H).
Voltage: 4V-24V AC / DC voltage.
Max. Current via individual outputs: 1A(observe total current).
Power input: standard 5.5mm*2.1mm female DC socket Jack power plug.
(You need to prepare it by yourself.It is not included)
How to use it
Controller at 3V,output is stable 3V;
Controller at DIR,output is near to the input;
Controller at 12V,output is stable 12V.
eg,input 5V,controller at 3V,output stable 3V;
controller at DIR,output near to 5V;
eg,input 16V,controller at 3V,output stable 3V;
controller DIR,output near to 16V;;
controller 12V,output stable 12V;
=======================================
One distributor can support 28 lights.Please expand to several boards if using more lights.
But the total output current must be less than input current.
Operation with DC, AC or digital current.
=======================================
Some questions and answers:
1,If thhe lights with same voltage and current can be used on same board.
2,The LED lights with different voltage can not be mixed on same board.If you need,there are two ways below,(A) to use two boards or (B) to connect resistor in series with lights .
A Use two boards to separate the different voltage led lights
B Connect resistor in series with lights
- 1pc Circuit Board and the accessories you will need, as the picture shows.
- The power adapter is not included.