eBay

Tegara CAT40 ER16 Floating Alloy Steel Tap Tapping Holder New

Product Code

202-5983

Product description

Taper: CAT40
Draw Bar Thread: 5/8" -11
Collet Series: ER-16
Proj (L): 2.5"

Product application

Floating tap holder is great choice for holding tap and reamer in light duty operation

Product features

.197 compression and .315 extension travel via adjustable internal springs
Use standard ER16 collet
All critical surfaces precision ground
Taper grinds to exceed AT3 standard
Made from alloy steel hardened to 54 - 56rc
Rear thread for pull stud is 5/8-11

We have other er collets, end mill holders & collet chucks available at My Ebay Store:

CAT40 ER16 Collet Chuck with Runout .0001" 5 pc package (p/n 202-1451 x 5 pcs)

CAT40 Pull Stud for various machine builders (Haas, Fadal, Mazak, Hurco, Mori Seiki,Okuma, etc)

Non-coolant pull stud Haas Fadal Mazak

Coolant pull stud

Made from alloy steel 5155 with heat treat to RC 56-58
Each retention knob is individually magnetic particle tested to ensure free of crack
High quality black oxide finish to ensure long enduring tool life
Fully ground on all critical surface including a pilot (dia. 0.636") under the flange of retention knob for full contact between tool holder's taper end and retention knob
Tolerance exceeds industry standards
Non-coolant through
stock # 202-5925

Haas retention knob

We also have ER-16 nut for collet chucks available

We also have ER16 wrench for collet chucks available

We also sell 1/32-1/2" Cat V-Flange Precision Ball Bearing Keyless Drill Chuck (p/n 202-1261A)

Also available is a CAT40 CNC Tool Tightening Fixture

SHARS 6" 670V Milling Vise +/-0.0004

6" wide jaw plate, 8.95" inner jaw opening, 17" outer jaw opening
Made from 80,000PSI stress relief cast iron
Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
Bed height Tolerance 2.875" +/-0.0005"
Clamping repeatability +/-0.0004"
Lifetime limited warranty
To learn more, click here to 202-0993

SHARS 6" 660U Milling Vise +/-0.0004

6" wide jaw plate, 6.25" inner jaw opening, 15" outer jaw opening
Single piece of stationary jaw and vise body to enhance clamping rigidness and accuracy
Made from 80,000PSI stress relief cast iron
Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
Bed height Tolerance 3.189" +/-0.0005"
Clamping repeatability +/-0.0004"
Lifetime limited warranty
To learn more, click here to 202-0995

SHARS 6" 600DS Double Station Milling Vise +/-0.0002

6" wide jaw plate
4.9" jaw opening in double station, 12" jaw opening in single station (conversion kit included)
Unique leadscrew design to allow to clamp either same sized or dissimilar sized parts
Jaw lift prevention mechanism by eccentric pin design
Made from 80,000PSI stress relief cast iron
Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
Bed height Tolerance 3.25" +/-0.0005" (matched bed height at no additional cost)
Clamping repeatability +/-0.0002"
Lifetime limited warranty
To learn more, click here to 202-0999

All Available to Ship NOW! at Fixed Prices

If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone:1-630-443-3244
Email: discountmachineshop@gmail.com

click here to visit my Ebay store now

SHIPPING: UPS Ground

Buyer pays ACTUAL UPS shipping & insurance, and a $3.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS.
We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package's recipient may need to pay these to clear customs.

PAYMENT:

We accept : VISA, MasterCard and E-Check on PayPal.com
Illinois residents add 8% sales tax.

RETURNS:

If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.

Any questions regarding our tools, feel free to email us at discountmachineshop@gmail.com