RX40

Universal 24V DC 30A relay remote control switch kit

For remotely turn on and off 24V DC application uses in automobile, motorcycle, boat, RV, boat, home, garden, hunting tool and any 24V device. receiver comes with wires for easy installation.

RX40 works with any device that operate from 18V to 24V DC

Require a 18v or 24v dc power supply

Specs:
Kit included: 1 switch receiver box, 1 remote transmitter (battery included)
Dimension: 2 1/2" x 2 1/2 x 1 3/8"
Remote mode: on and off, toggle mode
Remote range: 0'-80ft/~24m

(Remote range and signal strength depend on where device is setup, battery strength, interference, etc.)
Receiver Input/output power: 18V to 24V DC
standby current: 7.5mA

Relay standby state: normally open

Relay max load: 30A
Operating current: 500mA 
Operate Temp: 0F~135F 

How does this remote work?
When 24v is feed into the receiver's red/black wire, receiver is in standby mode, current draw at 7.5mA, and relay stays in "open" mode.
When remote transmitter is depressed, receiver's internal relay then closed, current draws 7mA with no load, and 24V DC is present at the output white+/black- wires. Maximum load to the relay receiver is 30A. When remote transmitter is depressed again, relay return to "open" state, and receiver is back in standby mode and continue to draw 7.5mA from your power supply unless the power is shut down.