(8) Siemens deka injectors

For questions please call AutoMods LLC at 319-665-6612

New set of 62 lb-hr fuel injectors for LS1/LS6 engine harnesses using LS3 fuel rails and intake manifolds. These injectors are specific for LS1/LS6 engine harnesses, where an LS7 engine or LS3 engine (or intake, fuel rail and heads) have been installed in place of the LS1/LS6 setup. These injectors are 1.5" tall (o-ring to o-ring) and use the LS1/LS6 (EV1) connector. Injectors utilize a new low mass disc design that ensures a spray pattern for ultra-fine atomization and improved burn efficiency. Siemens deka fuel injectors come complete and ready for installation with precision molded O-rings and fine-mesh fuel strainers. Sold as a set of 8.

TYPE : 12 Volt, High Impedance, Early connector (EV1)

NOTE : Changing injector size requires computer tuning. The injector height is 1.5" when measured from o-ring to o-ring (vs 2.5" for LS1/LS6), and are made for LS3/LS7 fuel rails, but have the older (EV1 - LS1/LS6) injector connector. These are not a direct swap on an LS1/LS6 intake, these only work on LS3/LS7/L76/L99 intake manifold/fuel rail combinations using an older 97-04 LS1/LS6 engine harness.

AutoMods

319-665-6612

open Mon-Fri 9am-5pm central