- McLaren 540C / 570S, 2015-2019 — Made for the Sports Series boot lid, sized to sit within the width of the tail so the wing ends stop short of the rear arches.
- Carbon Fiber — 3K twill weave under a UV-resistant clear coat, with the weave visible across the airfoil, the uprights and the end plates.
- GT4 Style Swan-Neck Form — The uprights rise from the boot lid and curve over the top of the airfoil, so the wing hangs from above rather than being pushed up from underneath. That is what separates a GT4 style wing from a flat GT wing, and it is the detail people notice first.
- Height And Read — This sits lower than a full race-height wing, which keeps it usable on a road car while still putting a clear horizontal line above the tail. From three quarters the car reads flatter and longer, because the eye is led along the wing rather than over the curve of the body.
- Foam And Carton Packing — Airfoil, uprights and end plates are separated and cushioned before boxing, so the thin trailing edge does not carry the load in transit.
This GT4 style wing is made for the 2015-2019 McLaren Sports Series — 540C and 570S — in carbon fiber. The standard rear of these cars closes over the engine bay and stops; there is no line above the tail at all. A GT4 style wing adds one, and it does it with swan-neck uprights that curve over the airfoil instead of standing under it, which is a very different shape from a plain flat GT wing: the wing appears to float, and the uprights read as part of the airfoil rather than as legs holding it up.
The material is carbon fiber in a 3K twill weave under a UV-resistant clear coat. A wing is a long unsupported span, so the section has to stay straight and the surface has to stay even — any ripple along the span shows immediately in reflected light. The clear coat is what keeps the black from chalking, and a wing lives in the sun and in the airflow behind the car, which is the harshest place on the body for a finish.
Before ordering, please confirm your car. This listing covers the 540C and 570S from 2015 through 2019. Check that the boot lid is the standard Sports Series panel and that no factory or aftermarket aero pack is already fitted, because the wing is shaped to the standard deck. This wing is not made for the 720S or the McLaren GT, and the 570GT is not covered in this listing. Send us photos of your boot lid from above and from the side at tail height, plus your VIN, and we will confirm the match before shipping.
- 2015-2019 McLaren 540C
- 2015-2019 McLaren 570S
- Style: GT4 Style, swan-neck uprights over the airfoil
- Material: Carbon Fiber, 3K twill weave, gloss clear coat
- Position: Rear Trunk / Boot Lid
- Not for McLaren 720S or McLaren GT (different rear body)
- Shaped to the standard Sports Series boot lid — please confirm no other aero pack is fitted
- 570GT is not covered in this listing — please confirm your model before purchase
- 570S Spider boot lid differs in detail — please confirm
- 1 x Carbon Fiber GT4 Style Wing, with Swan-Neck Uprights and End Plates
2. Payment must be completed within 48 hours after purchase.
3. Please make sure your eBay shipping address is correct before completing payment.
4. Unpaid items will be automatically cancelled after 4 days.
1. All items are shipped within 2-3 business days after payment is confirmed.
2. Delivery time: 7-15 business days to US, 10-20 business days to Europe, Australia, and other regions.
3. Shipping cost, taxes, and customs duties are not included in the item price. These additional costs are the buyer's responsibility.
GT4 Style Wing:
1. Packed with bubble wrap and rigid carton to prevent damage.
2. We will provide tracking information as soon as the order is shipped.
3. Please check package condition before signing.
2. Items must be returned in original, unused, and uninstalled condition with all packaging.
3. Buyer is responsible for return shipping cost unless the item arrived damaged or defective.
4. If you received a wrong item or it does not fit, please contact us first with photos — we will resolve it for you.
5. Custom-made or special order items are not eligible for return.
2. Warranty does not cover water damage, improper wiring, wrong installation, collision or accident damage.
3. Replacement or reshipment at our discretion, after inspection of product photos.
4. Customer pays shipping for warranty returns; we cover reshipping cost.
5. Warranty limited to original purchaser only.
There may be multiple versions of the same car model.
To avoid mistakes and unnecessary losses, please send us your car model and vehicle matching information before ordering.
We will confirm the details and produce strictly according to your vehicle information.
Please feel free to contact us if you have any questions.