Flexible LED Work Light — 800 lm Bendable Inspection Lamp
Bright, hands-free light for awkward, tight and outdoor jobs.
The 75 cm silicone light tube bends, wraps and hooks into place, then holds its shape — so you can aim light exactly where you need it and keep both hands free. With 800 lm daylight-white output, three modes, a magnetic handle and USB-C charging, it is a practical work light for garage, home and roadside use.
Key benefits
Bendable 360° silicone body that holds its shape
800 lm daylight-white output (6000K) for wide, even light
3 modes: Low / High / Flashing
Strong magnetic handle for hands-free mounting
IP65-rated dust and water resistance
USB-C rechargeable: approx. 2.5 hours charge, up to 7 hours runtime depending on mode
Slim 10 mm tube reaches into tight gaps
350 g and cordless once charged
Bends to Any Shape — and Stays There
The whole light head is a flexible silicone tube. Loop it around a suspension arm, hook it over a bonnet stay or stand it where you need it. It holds the shape you set and springs back without damage.
360° bendable silicone flex body
20,000+ bend-test durability
Flicker-free light for close-up work
800 Lumens of Daylight White
A 6000K daylight-white LED strip gives wide, even illumination across the full tube — useful for engine bays, brake work and other jobs where a narrow torch beam is not enough.
Even light across the full 75 cm tube
Bright enough for roadside use at night
Three Light Modes
One button on the handle cycles through Low, High and Flashing.
Low — saves power and reduces glare for close work
High — maximum brightness
Flashing — warning or signal light
Hands-Free Operation
Bend the light to hang it, hook it or stand it, and use the strong magnet in the handle to attach it to metal surfaces. Both hands stay free for the job.
Strong magnetic base in the handle
Flexible tube loops over panels and props
Slim 10 mm tube for tight gaps
IP65-Rated Dust and Water Resistance
Rated IP65, the light is designed to cope with rain, splashes and wash-downs — suitable for outdoor use as well as garage work. It is not intended for submersion.
Suitable for roadside breakdowns in wet weather
Durable construction for workshop use
USB-C Rechargeable
A Type-C port on the handle charges the built-in battery in about 2.5 hours. One charge gives up to 7 hours of light, depending on the mode selected.
Charges from a power bank, laptop or wall adapter
Cordless once charged — no trailing cable
How to Use
Bend to shape — twist the silicone tube around or over the work area; it holds the shape you set.
Power on — press the handle button to cycle through Low, High and Flashing.
Mount hands-free — attach the magnetic handle to metal or hook the loop over a panel.
Recharge — when the light dims, connect a Type-C cable for about 2.5 hours.
Ideal For
Engine bays and under-car inspection
Brake and wheel work
Plumbing under sinks and behind appliances
Electrics inside consumer units
Camping and tent lighting
Fishing, hiking and roadside emergencies
Specifications
Total length: 75 cm / 29.5 in
LED tube diameter: 10 mm
Handle length: 150 mm
Weight: 350 g
Brightness: 800 lumens, 6000K daylight white
Light modes: 3 (Low / High / Flashing)
Battery: built-in rechargeable, up to 7 hours runtime
Charging: Type-C, approx. 2.5 hours for a full charge
Water resistance: IP65
Flex durability: 20,000+ bend tests, silicone flex body
In the box: 1 × flexible LED work light, 1 × Type-C charging cable.
Please note: Measurements are approximate and may vary slightly. Runtime depends on the selected light mode. Vehicles, tools and scene props shown in photos are for demonstration only and are not included.
