EVATIDE MARINE

BLACKWATER EVA HELM PAD

13mm Anti-Fatigue Marine Comfort Mat

BROWN OVER BLACK | 39 x 16 IN | FAUX TEAK | PEEL & STICK

Evatide Blackwater Brown over Black 13mm EVA Helm Pad 39x16 inch faux teak boat standing mat

MORE COMFORT AT THE HELM. CLASSIC FAUX-TEAK STYLE.

Refresh your helm station with the EVATIDE MARINE 13mm EVA Helm Pad, featuring a rich Brown over Black faux-teak finish and the distinctive BLACKWATER fish-inspired engraved design.

Whether you are fishing, cruising or spending extended periods at the controls, this cushioned EVA standing mat provides a thicker, more comfortable surface beneath your feet while adding a warm, marine-style appearance to your boat.

Constructed from closed-cell EVA foam with a brushed surface, routed grooves, rounded corners and pre-applied self-adhesive backing, this aftermarket helm pad is designed for installation on a suitable, properly prepared flat surface.

PLEASE NOTE: This listing is exclusively for Brown over Black. Overall dimensions are approximately 39 x 16 inches. Confirm your installation area, selected color and pictured design before purchasing.

WHY CHOOSE THIS EVA HELM PAD?

13mm Cushioned Comfort — A thicker EVA profile designed to add cushioning while standing at the helm.
Brown over Black Color — A warm brown textured surface with contrasting black routed details.
BLACKWATER Fish Design — Decorative fish graphic and lettering as shown in the product images.
Brushed Faux-Teak Texture — Marine-inspired grooves and surface detail.
Peel-and-Stick Installation — Pre-applied adhesive backing for a compatible mounting surface.
39 x 16 in Footprint — Rounded rectangular profile for suitably sized helm areas.

REFRESH YOUR BOAT HELM STATION

A comfortable marine-style standing surface for fishing boats, center consoles and other helm areas with adequate mounting space.

Blackwater Brown over Black EVA Helm Pad boat helm station application and marine standing mat

Application imagery is illustrative. Verify actual deck dimensions and clearances before ordering.

39 x 16 IN — VERIFY YOUR INSTALLATION SPACE

Overall size: 39 in length x 16 in width (approximately 99.1 x 40.6 cm).

Evatide Blackwater Brown over Black EVA Helm Pad 39 x 16 inch product dimensions

Measure the actual mounting area. Compatibility cannot be determined from boat make or model alone.

PRODUCT SPECIFICATIONS

SPECIFICATION DETAILS
BrandEvatide Marine
Product TypeEVA Boat Helm Pad
Product DesignBLACKWATER Fish Graphic
ColorBrown over Black
Length39 in (99.1 cm)
Width16 in (40.6 cm)
Thickness13mm (Approx. 0.51 in)
MaterialClosed-Cell EVA Foam
Surface FinishBrushed & Grooved Faux Teak
ShapeRounded Rectangle
InstallationPeel & Stick (Self-Adhesive)
PlacementBoat Helm Station
SKU / MPNBLKW-HELMPAD-13MM-BB
Quantity1 Helm Pad
Country of OriginChina

13MM VS 6MM EVA — EXTRA CUSHIONING AT THE HELM

Compared with a common 6mm EVA decking profile, the 13mm EVA Helm Pad provides a thicker cushioned surface for standing at the controls.

13mm versus 6mm EVA helm pad thickness comparison for marine standing comfort

Illustrative thickness comparison. Actual comfort depends on individual use and mounting conditions.

BROWN OVER BLACK — DUAL-LAYER EVA CONSTRUCTION

A textured brown top layer is paired with contrasting black EVA foam. Routed grooves reveal the darker layer to create a faux-teak appearance.

Brown over Black dual-layer closed-cell EVA helm pad material structure and faux teak grooves

TEXTURED FAUX-TEAK SURFACE

Brushed EVA texture and routed black grooves create a distinctive marine-style finish. The surface is designed for boat helm and deck accessory applications.

Brown over Black EVA helm pad wet surface texture water droplets and routed faux teak grooves

Wet-surface images demonstrate surface appearance only and do not indicate a certified slip-resistance rating. Exercise care on wet decks.

FITMENT VERIFICATION — PLEASE READ

This is an independent aftermarket marine accessory. Compatibility with any specific Blackwater boat model or production year has not been verified.

Before ordering, please verify:

  • The exact available helm-area dimensions.
  • That the full 39 x 16 in pad footprint will fit.
  • The shape and condition of the intended mounting surface.
  • Clearance around seat bases, hatches, hardware, drains and raised edges.
  • Any previous repairs, modifications or installed accessories.
  • The selected Brown over Black color and pictured product design.

Boat make or model references do not establish confirmed fitment. The buyer is responsible for checking dimensions and suitability before installation.

PEEL & STICK — FOUR INSTALLATION STEPS

The pre-applied adhesive backing supports straightforward installation when the mounting surface is suitable and properly prepared.

EVA boat helm pad peel and stick adhesive backing four step marine installation guide
STEP 1 — PREPARE: Clean the mounting surface and allow it to dry completely.
STEP 2 — ARRANGE: Position the helm pad without removing the adhesive liner.
STEP 3 — VERIFY: Confirm alignment, available space and hardware clearance.
STEP 4 — PEEL & PRESS: Gradually remove the protective liner and press the pad firmly onto the prepared surface.

Do not apply over dirt, moisture, loose coatings or unsuitable materials. Follow the applicable adhesive installation requirements.

PRODUCT PACKAGING & DELIVERY

One EVA Helm Pad is included. Packaging may vary depending on handling and transportation requirements.

Evatide marine EVA helm pad protective packaging and shipping presentation

Packaging image is illustrative. Actual packing materials and presentation may vary.

WHAT IS INCLUDED?

1 x EVATIDE MARINE BLACKWATER EVA Helm Pad

Color: Brown over Black

Dimensions: 39 x 16 in

Thickness: 13mm

Boat, helm hardware, installation tools and other accessories shown in lifestyle images are not included.

SHIPPING & RETURNS

Shipping methods, handling time, estimated delivery dates and return eligibility are displayed in the shipping and returns sections of this eBay listing.

Please review the applicable shipping and return terms before placing your order. Delivery estimates may vary by destination and carrier conditions.

1-YEAR LIMITED ADHESIVE WARRANTY

EVATIDE MARINE provides a one-year limited warranty for qualifying adhesive backing defects under normal use, subject to applicable warranty conditions.

This limited warranty does not cover improper surface preparation, incorrect installation, modifications, accidental damage, normal wear or heat-related deformation caused by reflected or concentrated sunlight.

The warranty applies to qualifying adhesive backing issues and is not a general one-year warranty covering every material or type of damage.

FREQUENTLY ASKED QUESTIONS

Q: Will this helm pad fit my Blackwater boat?

Fitment is not confirmed by brand alone. Measure the available mounting surface and compare it with the 39 x 16 in dimensions before ordering.

Q: What is the difference between 13mm and 6mm EVA?

The 13mm version provides a thicker cushioning profile. This listing includes the 13mm EVA Helm Pad.

Q: Is this the Brown over Black version?

Yes. The top surface is brown with black routed details. Gray over Black is a separate product listing.

Q: Does the helm pad have adhesive backing?

Yes. It includes pre-applied self-adhesive backing for installation on a suitable, properly prepared surface.

Q: Is this an original Blackwater manufacturer part?

No. This is an independent aftermarket marine accessory offered under the EVATIDE MARINE brand.

Q: Can this pad be installed over existing flooring?

Installation suitability depends on the existing material, surface condition and adhesive compatibility. Verify the mounting surface before installation.

MARINE HELM PAD | INTERNATIONAL PRODUCT REFERENCE

English: Brown over Black EVA Boat Helm Pad, Anti-Fatigue Marine Standing Mat, Faux Teak Boat Mat, Self-Adhesive Marine Helm Pad.
Deutsch: EVA Steuerstandmatte, braun-schwarze Bootsdeckmatte, EVA Bootsdeckbelag.
Francais: Tapis EVA pour poste de pilotage, tapis de bateau marron et noir, revetement imitation teck.
Polski: Mata EVA na stanowisko sternika, brazowo-czarna mata do lodzi, pianka EVA na poklad.

AFTERMARKET PRODUCT NOTICE: EVATIDE MARINE is an independent aftermarket marine accessories brand. References to BLACKWATER identify the pictured design or potential boat-related application only. This product is not represented as an original equipment manufacturer component, and no affiliation, sponsorship or endorsement by any third-party boat manufacturer is claimed. Third-party trademarks remain the property of their respective owners.

EVATIDE MARINE
Precision Marine Comfort & Decking Accessories
EVA HELM PADS | MARINE DECKING | BOAT ACCESSORIES

Choose the right size. Verify your fitment. Enjoy a more comfortable helm.