Videk C02091 Vision Inspection Controller – Advantech IPC-6606P3-25Z

Used Videk machine vision controller from a print/mail verification line, built on an Advantech IPC-6606P3-25Z industrial chassis. Powers on, passes POST, and boots into the Videk vision software. The software loads job templates and reaches the main operator screen (shown offline; no cameras were connected for testing).

Tested

• Powers on and POSTs (BIOS screen pictured)
• Boots QNX and launches the Videk vision application
• Loaded job: Data Matrix type
• Not tested with cameras, encoders, sensors, or on a production line

Specifications

• Videk Model: C02091
• Chassis: Advantech IPC-6606P3-25Z
• SBC: Advantech PCA-6178B2 (BIOS V1.10)
• CPU: Intel Celeron 850MHz
• RAM: 128MB
• Storage: 40GB IDE hard drive (WD400BB) with QNX + Videk software
• Drives: MSI 52x CD-ROM, 3.5" floppy
• Power: 100–120V / 200–240V selectable, 50/60Hz

Rear I/O

• Videk I/O panel: CAM 1 & CAM 2 (DB9), EN1/EN2 encoder inputs, PP1/PP2, ST1/ST2, IOA/IOB, 12V IN (pluggable terminal blocks)
• PS/2 mouse/keyboard, COM1, LAN (RJ45), VGA
• Parallel printer port, additional RJ45 module

Notes

• The system clock resets on power-up, so the CMOS battery likely needs replacing.
• Software is included as found on the unit. No license documentation is provided beyond the QNX license label on the chassis.
• Includes the controller only. No cameras, cables, keyboard, mouse, or monitor.

Sold as pictured. Please review all photos and ask any questions before purchasing.