All modifications must be installed by licensed mechanics and in compliance with your local modification regulations

​​​​​​​

Notice:

Pick up service is not available.

Fit For     

For BMW 5 Series E34 Sedan 518i / 520i / 525i / 530i / 535i / 540i / 524td / 525tds 01/88 - 12/95

Strut diameter at the front axle of 55 mm

Specification

Height adjustable: Yes, lowering 0-25mm depending on the vehicle models
Top mounts: Front and rear OE top mounts required 
Damping : fixed damping
Spring rate Front: 2.5 kg/mm (140 lbs/in)
Spring rate Rear: 3 kg/mm (168 lbs/in)
Front spring inner diameter: 71-119 mm
Rear spring inner diameter: 68.7-78.8 mm
Spring length Front: 225 mm
Spring length Rear: 350 mm
Spring Preload advised: 7-10 mm
Shock type: Twin tube

Package included
2x Front coil-overs
2x Rear coil-overs
2x C spanners

Dimension
Package size : 70*50*20 cm
Weight: 24800 g

Feature

1.  0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

Note

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.