Introductions:
【What Is A Turbocharger】A turbocharger is a device fitted to a vehicle’s engine that is designed to improve the overall efficiency and increase performance. This is the reason why many auto manufacturers are choosing to turbocharge their vehicles. And as time goes on, more and more vehicles will be fitted with them.
【Turbocharger Function】A turbocharger can increase the power of your engine by up to 35%. It can start the machine in a short time,make the boost comes up fast and pulls strong, making it work more efficiently. Made of nickel-based casting alloy,solid product appearance, can withstand high pressure. It also can extend the life of the car after installing and using the turbocharger.
【Customer Satisfaction】Installation under professional instruction is recommended.Feel free to message us through “contact sellers” if products don't meet your expectations or you are not sure about the vehicle fitment, we’ll take care of it.

Specifics and Features:

Capable of boosting horse power up To 300+ BHP

High quality material, cast housing with durable steel

4 bolt exhaust flange

Capable of 8 PSI or 15-25 PSI output at peak power

Internal wastegate setting: 8 PSI 

Part Numbers

49135-03130,49135-03300,49135-03110,49135-03101,

49135-03300,ME201258,ME202578,49377-03031

Fitment:

For Mitsubishi Pajero II, Shogun 2.8L 4M40T 94 - 98

For Mitsubishi Triton, L200 2.8L 4M40T 94 - 98

For Mitsubishi Express L300, Delica 2.8L 4M40T 94 - 98 

Our Advantage:

1. OEM-quality and size with little modification

2. Turbine housing uses cast iron withstand temperatures up to 700

3. Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900

4. Cast aluminium blades with good gas tightness and corrosion resistance

5. The volute is made of nodular cast iron, which can withstand 700 degrees high temperature, and its tensile strength is as high as 450MPa.

6. 100% BALANCING TEST:

This Turbocharger you will receive has been balanced using the VSR machine technology.

Supercharger installation instructions:
1. Change engine oil
2. Replace air filter and oil filter
3. Clean the oil supply and oil outlet pipes to ensure that there is no damage. The oil hangs on the wall of the oil pipe and the oil pipe flow channel becomes narrow to increase the oil pressure.
4. Check the intake and exhaust pipes to ensure there is no obstruction or interference
5. Make sure the screws and clamps are tightened and there are no air leaks.
6. When installing the oil inlet and outlet holes, sealant cannot be used, only gaskets can be used.

Working Environment of Turbocharger 

Because turbochargers often work at high speeds and high temperatures, the temperature at the exhaust turbine end of the turbocharger is about 600℃, and the turbocharger rotor rotates at a high speed of 8000- 11000r/min. Therefore, in order to ensure the normal operation and extension of the turbocharger Service life, pay attention to the following points in use:

 1.Do not leave the turbocharger in the car

2.Do not turn off the turbocharger immediately

3.Keep the turbocharger clean

4.The turbocharger needs to be cleaned

5.Pay attention to overhaul of turbocharger

6. Working environment of turbocharger

NOTE:

* Please confirm your old turbo part number matches up with one of the part numbers above

* Professional installation is highly recommended (No Instruction Included)

* For any needs please contact us