It can be used if the shape and size is the same.

Refrigerator does not stop easy troubleshooting steps:
1, fresh room refrigeration without effect, generally due to severe fluorine deficiency.
2, fresh room interior wall ice or frost, generally - bad thermostat or a small amount of fluorine, local ice or frost is mostly a small amount of fluorine.
Fluorine. Full knot is likely to be a thermostat failure.
3, a new thermostat anti-clockwise twist to the end does not stop - generally the line is not inserted correctly.
4, a new thermostat has not been started may be the compressor or starter, protector failure.

Thermostat purchase guide.
1, see whether you are a refrigerator or freezer
Refrigerator choose wDF series, freezer choose wPF series.
2, look at the fixed on the wire way, is the two sides of the fixed or the middle of the fixed.

Thermostat does not look at the brand model, the shape is almost the same can be used. If your original is two pins can also choose our three pins. In addition, the temperature sensing line length difference of about 20 centimeters can also be used, if you feel the temperature sensing line is long, you can disk up, but do not cut Oh, cut on the waste.

Wiring.
According to your original parts of the letter of the pins corresponding to the connection can be thermostat pin definition.
H -- for the power inlet and bulb L -- connect the electric heater
c---connect the compressor and winter switch

Package Include:

1 x thermostat