In restricted pipe spools, structural assemblies, and awkward positional welds, rigid torch heads restrict torch angle and cause operator wrist strain, leading to inconsistent tungsten distance and weld defects. The CK Diamond EDS 17 Flexi Head Air Cooled Single Button TIG Torch 4m (CK-EDS17F040S03) resolves these operational bottlenecks by integrating a durable, multi-angle flexible neck with heavy-duty German engineering for precise heat input and reliable arc control in high-demand industrial setups.
What’s In the Box
-
1 x CK Diamond Series EDS17 Flexi Head TIG Torch Body
-
1 x 4m SuperFlex Cable Assembly
-
1 x Pre-installed Single-Button Momentary Switch
-
1 x Italian Leather Protective Hose Wrap (4m)
-
1 x SK35 (13mm Dinse) Machine Plug Assembly
-
1 x CK Starter Consumable Kit:
-
1 x Standard Back Cap (Long)
-
1 x Short Back Cap
-
2 x Standard Collets (1.6mm, 2.4mm)
-
2 x Collet Bodies (1.6mm, 2.4mm)
-
2 x Alumina Ceramic Gas Nozzles (Size 6 - 9.5mm, Size 7 - 11.0mm)
-
1 x 2% Ceriated Tungsten Electrode (1.6mm)
-
1 x 2% Ceriated Tungsten Electrode (2.4mm)
Benefit-Driven Technicals
-
360-Degree Flexible Head Design: Allows tool-free neck bending to reach difficult joint geometries without sacrificing current transfer stability or damaging internal braid connectors.
-
SuperFlex Cable Technology: Ultra-lightweight, high-flexibility power cable dramatically reduces operator wrist drag and fatigue during long continuous welds.
-
Italian Leather Outer Wrap: Provides exceptional heat, slag, and burn-through protection along the entire 4-metre run while maintaining supple maneuverability on site floors.
-
Integrated Single-Button Control: Provides instant HF arc initiation and remote slope signaling in a textured, ergonomic handle for direct control in any position.
-
Modular European Construction: Engineered by EWS in Germany to ensure tight fitting tolerances, high current density, and seamless compatibility with standard European machine connection standards.
Features & Applications
Features:
-
Heavy-duty 150A air-cooled performance envelope
-
Multi-directional flexible neck assembly
-
Supple 4m SuperFlex cable assembly
-
Protective Italian leather hose jacket
-
Ergonomic handle with single-button trigger switch
-
CE EN 60 974-7 certified build quality
Applications:
-
Industrial mild steel and stainless steel pipework
-
Architectural metalwork and sheet metal fabrication
-
On-site plant repair, maintenance, and field installations
-
Precision tubular frame structures and automotive fabrication
EWS Expert Note
When reshaping the flex neck on the EDS17 torch, always apply pressure using both thumbs distributed along the neck radius rather than making sharp bends at a single point right near the handle base. Bending the internal copper coil too sharply over a single pivot point prematurely fatigue-stresses the conductor braid, decreasing its ampacity and service life.
Pros & Cons
Pros:
-
Tool-free flexible neck significantly improves torch positioning in restricted structural joints.
-
SuperFlex cable and genuine leather cover combination offers superior durability with minimal hand drag.
-
Manufactured to strict European standards (CE EN 60 974-7) for consistent power transmission and low running temperatures.
Cons:
-
Application Limit 1: Air-cooled 150A DC rating is unsuited for heavy-wall continuous high-amperage production runs requiring a water-cooled system.
-
Application Limit 2: Not recommended for continuous high-amperage AC aluminium welding over 115A where thermal buildup requires active liquid cooling.
Technical FAQs
Q: Is the CK Diamond EDS17 compatible with standard 17-series front-end consumables?
A: Yes, the CK Diamond EDS17 torch body utilises standard 17-series fitting threads. It accepts standard collets, collet bodies, gas lenses, ceramic cups, and back caps from standard European manufacturers, allowing effortless integration with existing workshop inventory without needing specialised tooling or proprietary front-end adapters.
Q: What are the primary operating limits of this 150A air-cooled TIG torch?
A: The torch is rated at 150 Amps DC and 115 Amps AC at a 60% duty cycle. Exceeding these current thresholds or duty cycle windows for prolonged periods will result in thermal overload across the air-cooled conductor, potentially compromising cable insulation and flex-head flex life.
Q: Does this torch package comply with current UK and European safety regulations?
A: Yes, the CK Diamond Series EDS17 torch package is fully compliant and certified to CE EN 60 974-7 safety standards for arc welding equipment. Its build specification, insulating materials, and quick-connect fittings fully satisfy current UKCA and CE workshop safety regulations.
As an Official UK Stockist, Express Weldcare provides genuine CK Worldwide equipment with expert technical backup and fast despatch.