Upgrade or replace the steering system on your DIY off-road build with this 380mm / 15-inch rack and pinion steering assembly.

Designed for custom Go Karts, Buggies, ATVs, UTVs, Golf Carts and similar off-road vehicles. The steel steering rack provides approximately 70mm of steering travel and about 1.75 turns lock-to-lock.

Key Specifications:

• Type: Rack And Pinion Steering Assembly

• Overall Length: 380mm / 15"

• Steering Travel: Approx. 70mm

• Steering Ratio: Approx. 1.75 Turns

• Input Spline: Ø14mm × 30T

• Tie Rod Thread: M12 × 1.25

• Housing Diameter: Approx. 48mm / 1.9"

• Material: Steel

• Tie Rod Length: Approx. 120mm each

Package Includes:

• 1 × 380mm / 15" Steering Rack And Pinion Assembly

• 2 × Approx. 120mm Tie Rods

• 4 × M12 × 1.25 Tie Rod Ends

FITMENT NOTICE:
This is a dimension-specific steering component and is not guaranteed to fit every Go Kart, ATV, UTV or Buggy.

Before ordering, please compare your original steering rack with our:

1. Overall rack length

2. Mounting hole locations and dimensions

3. Input shaft diameter and 30T spline

4. Tie rod thread size

5. Steering travel

6. Housing diameter

7. Tie rod length and mounting configuration

Please make sure all critical dimensions match your original setup before purchasing.